GLMedia — C10DA. Blank worksheet; no completed test results.
Event / date / person responsible / off-air rehearsal:
Distributor: AJA C10DA Mini-Converter / serial / label / power supply:
Manual: v1.0r1, published September 27, 2016 / applicable edition / page / link:
Do not apply OG-C10DA controls without its own documentation.
Generator: manufacturer / model / version / output / exact reference signal:
Reference path: generator → C10DA INPUT → OUT → cable → receiver:
Separate picture path / separate LTC path:
Receiver: exact model / firmware / connector / accepted reference formats and levels / manual:
Input loads and termination / loops or T connections / measurement point:
Initial DIP 4/3/2/1 positions / orientation and photo / rollback configuration:
DIP 4 left 75 ohms or right open / reason for this path:
DIP 3/2/1 / common gain / measured level justifying a change:
Compatible source / power disconnected / BNC cables connected / power applied:
Test ID / proposed or completed / one variable / before and after / evidence:
Direct: receiver / cable / signal / lock / observed time:
Distributed: OUT / cable / signal / lock / observed time:
Measurement: instrument / settings / load / point / waveform / level / rate / evidence:
Branches 1–6: receiver / OUT / cable / configuration / result / open items:
Lock / picture / switching / latency: independent results:
Manufacturer: model / manual / page / instruction:
Restoration / all branches checked / open items: