GLMedia — AJA FS2. Blank worksheet: contains no test results.
Event / session / date / person responsible / off-air test:
FS2: serial number / CONFIG 13 Software Version / manual and edition:
Diagram for each destination: source → processor → connector → receiver:
Saved initial settings / how to restore them / save record:
Source and receiver: manufacturer / model / version / manual / requirements:
VIDEO 1/2: 1 Video Input / detected format / 2 Output Format / 3 Video Output Mode:
SYSTEM: 9 Frame Rates / 8 Genlock Source:
Ref Loop: generator / signal / format / path / termination:
STATUS: IN / GEN / OUT / exact alarm / FMT ERROR:
OUTPUT: 1.1 SDI1 Video Out / 1.2 SDI2 Video Out / BNC actually used:
AUDIO 1/2: 1.0 Audio Input / Channel Map or Stereo Map / initial map:
Destination channel / processor channel / source and channel / sample:
OUTPUT 8 Analog Audio Out / DB25 cable and verified pinout / receiver:
Analog Audio Std / receiver's accepted level / measured level or not measured:
Initial Audio Follow Video / map, levels, delay and phase before/after:
HDMI Video Out / HDMI Audio Out group 1-8 or 9-16 / receiver:
Required timecode: type / transport / format / source and destination versions:
Presence and reading before the converter / after / continuity / relationship to video:
Test ID / one variable / sample before / sample after:
Video / audio / reference / timecode results in separate columns:
Confirmed solution from another setup / failure report / source / scope:
Manufacturer instruction / model / version / page / link:
Your test: proposed or completed / person responsible / evidence:
Return to actual source and initial state / acceptance for each destination / open items: