GLMedia — GEN10/FS4 reference worksheet. Blank form; no test results.
Event / date / person responsible / test outside show time:
GEN10 Mini-Converter: serial number / label / manual and edition / power:
Do not apply OG-GEN10 controls or settings from another revision without checking.
Receiver: maker / exact model / version / manual / accepted references:
Content format for each receiver / accepted reference format, recorded separately:
Reference path: generator → group → BNC → cable → receiver → termination:
Content path: source → processor → switcher → destination:
Initial SW1–SW8 DIP settings / photograph or written record / return settings:
OUT 1–4 SW1 SD/HD / OUT 5–6 SW2 SD/HD / BNC in use:
SW3 SD Black/Bars and AES-11 silence/tone / affected branches:
SW4 FORMAT / SW5 HD FMT / matrix in SW8, SW7, SW6 order:
Reference signal measured or detected / instrument or display / evidence:
Initial state saved / +5 VDC disconnected / proposed or executed comparison:
FS4: serial number / CONFIG 13 Software Version / mode:
VIDEO Output Frame Rate / Genlock Source / VID / final Output Format:
Ref Loop: cable / unused BNC or onward connection / last receiver / 75 ohms:
STATUS: IN / GEN / OUT / exact alarm / detected format:
Test ID / one variable / before and after states / all affected branches:
Real content / switching / reference / audio / ATC: separate results:
Manufacturer: model / version / page / link / instruction:
Own test: proposed or executed / person responsible / evidence:
Restoration / acceptance at each destination / outstanding checks and missing manuals: