GLMedia — blank worksheet: ATEM Television Studio HD, venue outputs and audio.
Contains no completed tests. Enter only actual data and observations.
Event / date / operator / person responsible / off-air test window:
Full model and unit photo/label / firmware / ATEM Software Control / operating system:
Manual / edition / section / installed version checked or still to check:
Reference: ATEM Television Studio Switchers, June 2020, compact Television Studio HD.
Do not apply its aux count or menus to HD8, HD8 ISO or Pro 4K.
Destination: room / projector-TV-capture device / model / required audio:
Physical port: Program / Auxiliary / SDI returns 5–8 / Multi View:
Converters-distribution: models / inputs / outputs / formats / distances:
Auxiliary 1: initial selection / test source / selection to restore:
Source: Program / Input / Preview / Clean Feed 1 / Clean Feed 2:
Immediate source change: agreed test window and person responsible:
White AUX buttons: auxiliary selection mode; state after returning to normal operation:
Name-logo: originating source / embedded before ATEM / upstream / DSK 1 / DSK 2:
What each destination must retain / exclude / who approves:
Manual page 148: Clean Feed 1 excludes DSK 1/2; Clean Feed 2 retains DSK 1 and excludes DSK 2.
Audio: program / return Mix Minus exclusion / corresponding source:
Manual page 18: aux carries SDI program audio; picture selection does not create an independent mix.
Mix Minus: initial state / excluded input / other paths carrying the same voice:
Tests: voice / clip / camera cut / lower third / break / return:
For each test: variable / what stays unchanged / expected result / observation / sample:
Picture at Program / aux / venue receiver / recording / stream:
Audio at program / room / guest / recording / receiver and listening point:
Cuts / sync / agreed duration / outstanding checks by destination:
Manufacturer instruction: model, edition, page and link:
Planned test / completed test / observed result:
Restored state / owner of outstanding check / closure date: