GLMedia · D80 · Preparation and supervision Blank fields for actual tests; no prefilled results. Event / venue / date / system technician: ________________________________________ Amplifier / identification / firmware: ________________________________________ Saved starting configuration / reference file / reference date: ________________________________________ Cabinet model and count per output / identification of each cabinet: ________________________________________ A/B destination / C/D destination / setup / Output mode: ________________________________________ Console or processor / signal / physical input / Input mode / Input routing: ________________________________________ AES3 source / Master / sync status / sampling rate / SRC: ________________________________________ Patch / cables / adapters / rack panel / attached plan: ________________________________________ Cable length / Speaker count / Cross-section / LoadMatch On/Off / message: ________________________________________ Listening per destination / test level / positions / test window: ________________________________________ Changes compared with reference: ________________________________________ System check: time / channel / way / Calib.: Z / Check: Z / Status / observation: ________________________________________ Load monitoring: time / channel / MUTE / standby / Load monitoring On/Off: ________________________________________ LM Period / LM Threshold / zMin tolerance / zMax tolerance / Dev.: ________________________________________ Exact error message and time before disabling LM: ________________________________________ Cabinet and way to inspect separately: ________________________________________ Proposed change / reason / observed result / restored state / next action: ________________________________________ Turn off amplifiers before changing power-output connections. System check produces audible signals. Do not widen tolerances to hide a warning. D80 central NL8 must not connect directly to a cabinet. D80 Manual 1.14 en, 09/2019: §§6.2,11.2,11.3,12.6,12.7,12.8.2,17.1.