GLMedia · Yamaha PX5 routing and output record
Fill in during the check; no results are prefilled.

Date / event / venue: ________________________________________
PX5 label / serial / firmware / nominal supply voltage: ________________________________________
Source / mixer / processor / input cable: ________________________________________
Exact speaker / documentation / total load: ________________________________________
Saved preset / SP MODEL / SP TYPE: ________________________________________
ROUTING / SENS./GAIN / Power Boost: ________________________________________
SP IMPEDANCE / IMPEDANCE (Ω/UNIT) per speaker: ________________________________________
INPUT A/B / METER INPUT / reading: ________________________________________
MUTE / A/B volume / B balance: ________________________________________
METER OUTPUT / SIGNAL / CLIP/LIMIT: ________________________________________
PROTECT / message / log / ventilation: ________________________________________
HPF / LPF / FREQ / TYPE / X-OVER: ________________________________________
SPEAKERS pinout / cable / output / speaker: ________________________________________
One changed variable / result / restored state: ________________________________________

Power off before handling speaker cables. Do not join A/B or terminals to the chassis. Keep protective filters and limiters; leave internal work to service.
Yamaha PX10/PX8/PX5/PX3 Reference Manual IP-F0 (04/2023): pp.8–11,15–16,20–24,26–27,30,35,44–45.