GLMedia · Y8/Y12 · Preparation and balance
Blank fields for actual checks.

Event / venue / date / technician: ________________________________________
Cabinet / exact model / position / label: ________________________________________
Amplifier / firmware / channel / output mode: ________________________________________
Saved project and starting configuration: ________________________________________
Cabinets per channel / cabling group / connectors: ________________________________________
Plan / orientation / splay angles / Line or Arc: ________________________________________
CUT / CPL / HFC1 or HFC2 / EQ / starting level per channel: ________________________________________
Reference position / near area / transition / far area: ________________________________________
Additional distances / temperature / relative humidity: ________________________________________
Actual subwoofer / mode / signal / destination / delay / polarity: ________________________________________
Test signal and level / agreed test window: ________________________________________
TOP alone / SUB alone / both / position / observation: ________________________________________
Input state / limiters / level where difference appears: ________________________________________
Single proposed change / observed result / final configuration: ________________________________________

Turn off the amplifier and disconnect both cable ends before checking power cabling. Identify the rigging accessory; this record does not calculate loads or configure ArrayProcessing.
Y8/Y12 Manual 1.3 en, 12/2022: §§2.1–2.5, pp.5–9.