GLMEDIA — FX9: COLOR, LUT AND PLAYBACK
Blank worksheet. Enter actual off-program observations only.
Date / event / operator:
PXW-FX9 variant / serial / firmware:
Applicable manual and edition:
Starting settings and restoration procedure:
Project > Base Setting > Shooting Mode:
Project > Rec Format > Frequency / Video Format:
Output format / receiver / input:
Shooting > Monitor LUT > Category / LUT Select / User 3D LUT Select:
Shooting > Monitor LUT Setting > Internal Rec / Monitor Out:
SDI1 / SDI2 / HDMI / VF-Streaming status:
Monitoring > Gamma Display Assist > Setting:
Receiver manufacturer / model / firmware / manual:
Processing in camera / converter / switcher / monitor:
Gamma, gamut, LUT and levels required by production:
Documented gamma, gamut, LUT and levels at each stage:

TEST (one change at a time)
Clip / format / recording settings / comparison point:
State: Stby / recording / playback:
Change made / settings kept unchanged:
Image observed in viewfinder / output / final receiver:
LUT baked into clip: check / unresolved:
External transform: equipment / manual / actual result:
Observed dropouts or delay / test duration:
Conclusion limited to observed results / next check:
CANCEL/BACK: return to Stby confirmed:
Settings restored / program signal checked:

Do not infer output color from the viewfinder image.
Internal Rec can bake a LUT into the main recording.
Check the exact manual for any external device.