GLMEDIA — BARCO G62-W9: SIGNAL AND LENS
Blank worksheet. Record actual observations outside the live program.
Date / event / person responsible:
Model / serial / firmware (Status > Projector information):
Lens: label reference / configuration / Lens Support:
Manual / edition / applicable sections:
Confirmed quantity / location / availability:
Initial settings and how to restore them:

INPUT
Source / operating system / version / adapter:
Full path, devices, inputs, outputs and cables:
Source > Input signal / HDMI1 or HDMI2:
Source > HDMI > EDID (per port):
Output format / Status > Signal reading:
Resolution / progressive-interlaced / vertical frequency / color space:
Shutter (AV Mute) / content sent:
Single change / result / section still unresolved:
Direct connection with known source and cable / full path:
Observation duration and conditions:

LENS AND FRAMING
Screen: width / height / aspect ratio:
Complete projected area / content margins:
Distance: measured value and reference point:
Verified throw ratio and range / initial calculation (not an approved installation):
Approved position and alignment / beam area checked:
Scaling / Zoom / Lens Shift / Focus / Lens Lock:
UST fixed in support: exact procedure checked:
Pattern used / center / corners / result with actual content:
Lens Memory: position 1–5; zoom and focus checked separately:
Result / scope limit / next check:

FINISH
Test pattern Off / event source selected:
Settings restored / full path and content checked:
Pending checks / person responsible / next test window:
Complete each field with observations from the test.