GLMedia — PerfectCue: USB outputs, remotes and destinations
BLANK TEMPLATE. Enter only observed data and results.
Event / function / date:
Receiver: exact model / generation / known or unconfirmed firmware:
Remotes: model / buttons / label on each:
Computers: OS / app and version / test file:
Applicable document / edition or printed date / section / link:
Programmer / version / original assignments preserved:
A/B labels and initial connection / cable and adapter:

OUTPUT COMPARISON — SAME COMPUTER, CABLE AND FILE
Status: pending / performed; date:
Computer keyboard: forward / back / focus and result:
Output | Button | Reception | Stored sequence | Text/cursor | Presentation
A      |        |           |                 |             |
A      |        |           |                 |             |
B      |        |           |                 |             |
B      |        |           |                 |             |
Cursor observation does not identify every possible key combination.
Legacy PC-Micro: configure through A per diagram and applicable document.
PC-Micro 2.0 on Windows: dedicated app, right USB, Settings, SAVE ALL SETTINGS.
Legacy programmer: Device Ready / Load from PerfectCue / Save to PerfectCue.
Sequence for each button/output before the change:
One change / result / read-back / original assignments restored:
Difference following the port / data still unverified:
Delay if available / previous Keystroke Delay / restored value:

TWO REMOTES AND DESTINATIONS
Requirement: main/backup / independent files / other:
Path 1: remote / receiver / documented channel / output / computer:
Path 2: remote / receiver / documented channel / output / computer:
Links between receivers / function / applicable documentation:
Power on each receiver / Remote Control / AUTO / USB:
Remote/receiver channel match / separate channels for independent pairs:
Status: pending / performed; date:
Remote | Button | Receiving unit | Expected destination | Destinations changed
1      |        |                |                      |
1      |        |                |                      |
2      |        |                |                      |
2      |        |                |                      |
For shared commands: slide, animation, Blank and video on both computers:
Backup USB isolation test / return to shared control:
Unexpected cross-control / next check / return to initial setup:
Two USB outputs do not document two independent remote identities.
RJ45/XLR link connectors carry serial data and 12 V, not Ethernet/audio.

https://glmedia.tech/technical-help/perfectcue-presentation-control-backup/