GLMedia — blank worksheet: PTZOptics Gen 2, SDI signal and 3G converters.
This worksheet does not record completed tests. Enter observed results only.
Event / date / operator / program lead / off-air test window:
Camera: manufacturer / full model / variant / serial / SoC / firmware / MCU / other versions:
Manual for this unit / link / edition / section / open questions:
Camera output / format read: resolution, progressive or interlaced, exact frame rate / receiver or instrument:
Resolution dial and format menu: initial values / exact manual still pending or verified:
Do not apply MOVE 4K dial positions to G2. The official 30x G2 manual links returned 404 when the Spanish source guide was reviewed.
Source and path: camera / cable length and joins / converter / output / destination:
Converter: full name / 3G or other variant / internal version / Converters Setup version:
SDI input / HDMI input / separate sources when both are connected:
Output observed: HDMI OUT / SDI OUT / loop / destination and model:
A/B control: device / control name / output changed / initial value / test value:
Do not treat the switcher's 3G SDI Output control as a camera input adjustment.
White power LED / SDI-HDMI indicator: on-flashing-off / picture observed:
Converters manual, July 2024: SDI to HDMI 3G pp. 13–15; HDMI to SDI 3G pp. 19–21;
BiDirectional 3G pp. 25–28. ATEM Production Studio manual, December 2024, p. 65: SDI OUTPUT.
One test change / what stays constant / expected result / before-and-after observation:
Sample / start-end / agreed duration / dropouts-flicker / next step:
TV / capture / recording / streaming destination: format and picture/audio checked separately:
Candidate firmware: matched model and variant / file and source / release note:
G2: official page distinguishes SoC6 PoE / SoC7 Non-PoE; ask support if selection is uncertain.
No firmware was downloaded or installed in this batch. A changelog does not establish an SDI repair.
External result / manufacturer instruction / proposed or completed test (distinguish clearly):
Rollback state / untested items / owner / closure date: