GLMedia · SD10 · MADI channels and clock · blank worksheet
Date / event / test source / safe level:
SD10: identification / software / saved starting session:
Rack: model / cards / firmware:
Interface / converter / computer / driver / recording software:
Exact manuals and editions:
Sample rates: SD10 session / rack / split / interface / project:
MADI: device type / 56 or 64ch / SMUX or Hi-Speed:
Selected SD10 clock source / inputs showing OK:
Clock of each device / reference origin / reported status:
Installed Optocore / version / clocking plan:
Copy Audio / Listen To Copied Audio / source being monitored:

LOGICAL PORT | A/B CONNECTOR | IN/OUT | REMOTE DEVICE AND SOCKET | EXPECTED BLOCK | OBSERVED
Port 1:
Port 2:
Backup:
Main/Aux split: ON/OFF/GT / SYS/SYS/2 / type:

TEST CHANNEL | CONSOLE SOCKET | RECORDER TRACK | EXPECTED AUDIO | RESULT
1:
28:
29:
56:
Remaining required channels:

CLICKS | TIME/CHANNEL | CONSOLE SIGNAL | RECORDED FILE | CLOCK/FORMAT | SINGLE CHANGE | RESTORE

Verified BNC / panels / connectors / replaced segment:
Restored configuration / Audio Sync after loading the show:
Outstanding checks and technical escalation:
Fill in results after each test. Testing 1/28/29/56 does not verify all channels.
Keep protective earth connected. Electrical assessment requires qualified personnel.
DiGiCo TN294 rev. 3, 27 February 2013, pp.1–3; SD10 Getting Started B §1.7 p.1-14; SD & Quantum E §2.12.10 p.150.
https://digico.biz/wp-content/uploads/2020/02/TN294-SD-Series-Madi-Implementation.pdf
https://digico.biz/wp-content/uploads/2020/02/SD10_Getting_Started.pdf
https://digico.biz/wp-content/uploads/2022/03/SD-Quantum-Software-Reference-Issue-E-V1528.pdf