GLMedia · SD10 · MADI and monitor returns · blank check sheet
Date / event / responsible technician:
SD10: identifier / software / optical card / Optocore version:
Monitor console: model / software / verified manual:
SD Rack: identifier / fitted cards / firmware:
Optical MADI source / exact converter / manual and compatibility:
Fiber / connector / optical specification / 75 Ω coaxial cable:
Sample rate / channel format / available ports:
Planned clock / Audio Sync source and status on each device:
Rack Routing Mode / Rack Routing Order / active return:
MADI Split Main and Aux: ON/OFF/GT / SYS or SYS/2 / MADI type:
Gain, phantom and pad controller / Splits & Sharing state:
Saved sessions / safe level / previous patch:

PATH | SOURCE AND SOCKET | PHYSICAL PORT | DESTINATION AND SOCKET | CLOCK | OBSERVED
Input copy to monitor console:
Monitor bus return to SD10:
SD10 Copy Audio to physical rack output:
Reserved FOH outputs:

TEST | SOURCE AND LEVEL | SD10 METER | PHYSICAL OUTPUT | RESULT | RECOVERY

Copy Audio: cell / occupied or free output / Listen Source:
Listen To Copied Audio: initial state / final state:
Change made / previous configuration / how it was restored:
Outstanding checks:

Do not enter results before testing. Do not change return priority or gain during operation without an agreed plan.
Copy Audio is not snapshottable. Before using Unroute All Outputs, verify its effects and recovery procedure in the manual for the installed software.
SD10 Getting Started B §§1.4.1–1.4.6 pp.1-7–1-10; SD & Quantum E §2.12.9 pp.147–148; SD Rack B §§1.5,1.6.12–15 pp.1-7,1-12–13.
https://digico.biz/wp-content/uploads/2020/02/SD10_Getting_Started.pdf
https://digico.biz/wp-content/uploads/2022/03/SD-Quantum-Software-Reference-Issue-E-V1528.pdf
https://digico.biz/wp-content/uploads/2020/08/SD_Rack_User_B.pdf