GLMedia · SD12 · MGB recording and DQ control · blank check sheet
Date / event / venue:
SD12: identification / software / DMI cards / slots:
Rack / interface / exact model / firmware:
Computer / SoundGrid driver / host / Pro Tools version:
Saved starting configuration / test level / person responsible:

RECORDING
SD12 / MGB / session sample rate:
MADI per port: 56/64 / 64/32 or 56/28 / SMUX or High-Speed:
Clock: SOURCE / Current Clock Source / Status / system clock:
SD12 OUT → MGB IN: port 1 / port 2 / cable / panel / connector:
Required playback returns / initial patch:
MGB → SoundGrid host → driver → track route:
SOURCE | PORT/CHANNEL | LINK LED | TRACK | FILE LISTENED TO | RESULT
1:
32:
33:
64:
Remaining required tracks:

DQ CONTROL
Card: full model / DiGiCo firmware / Dante firmware:
Rack: Link / SR / Mode / Primary and Secondary / IP:
SD12: DMI port / Device Type / Connection / selected socket:
Dante subscription: rack socket → card channel:
Compatibility: exact edition / package / differences between requirements:
Rack Utility: version / PC/network / Detected Devices / name/model/firmware:
Do not change controls while another console is running the show.
SOCKET | STARTING GAIN/PAD/48V | OWNER | AGREED TEST | OBSERVATION | RESTORED VALUE

SINGLE CHANGE | STARTING STATE | RESULT | RESTORATION | OUTSTANDING CHECK

Testing 1/32/33/64 does not verify every track. Do not record results without testing.
DMI is not hot-pluggable. Phantom power only for equipment that requires it.
TN515 V2.1.0 controls DQ but does not update its firmware. No update/rollback procedure.
https://digico.biz/wp-content/uploads/2020/02/SD12_Getting_Started_A.pdf
https://assets.wavescdn.com/pdf/hardware/mgb-mgo-manual-v2.pdf
https://digico.biz/wp-content/uploads/2022/03/SD-Quantum-Software-Reference-Issue-E-V1528.pdf
https://digico.biz/wp-content/uploads/2021/09/DQ_MQ-User-Guide-Issue-A.pdf