GLMedia · J8 / SL-GSUB alignment · blank worksheet
Event / venue / date:
Saved project / revision:
J8: identity / count / geometry / amplifier / firmware:
J8: Line/Arc/AP / CUT / CPL / level / delay:
SL-GSUB: identity / count / position / amplifier / firmware:
SL-GSUB: SL-SUB setup / standard or INFRA / level / delay:
Upstream chain: inputs / latencies / filters / EQ / polarity:
External filters: type / frequency / slope / enabled state:
Reference signal and level / instrument / measurement settings:
Positions: location / distance / height / timing reference:

POSITION | TOPS ONLY | SUBS ONLY | SUM | OBSERVATION
Reference position:
Near area:
Middle area:
Far area:

VARIABLE | PREVIOUS STATE | TEST STATE | RESULT | RESTORATION

Open items / person responsible / capture file:
Do not enter 84, 85 or 65 Hz as crossover settings merely because they are response limits at −5 dB.
Retain the starting configuration and captures; do not fill in results that were not measured or heard.
SL-SUB/SL-GSUB 1.5 pp.7–8; J8/J12 2.2 pp.7,9; TI 385 10.4 §§2.5,2.5.4,11.1.1 pp.6–7,21.