GLMedia — Switcher synchronization. Blank worksheet; no completed test results.
Event / date / person responsible / off-air work:
Content signal diagram and reference signal diagram:
Switcher: manufacturer / full model / suffix / installed firmware:
Converter: manufacturer / model / hardware series / firmware:
Source: computer or camera / model / operating system / application / version:
Manual for each device: edition / section / pages / URL:
Physical input and label / received signal / resolution / frame rate / scan type:
Scaler source / scaler reference / output / connector:
Switcher reference: mode / generator / signal / termination / Gen Lock:
Input FS / mode / Output Phase / saved initial settings:
Symptom: rolling / jump / signal loss / fixed crop / other:
Destination: program / multiview / recording / screen / stream:
Effects and processing for each destination:
Test ID / single variable / sample before / sample after:
Received format / actual content / motion / switching / stability:
Delay: method / points compared / observed result / not measured:
Manufacturer instruction / applicable model and version:
Your test: proposed or completed / evidence / person responsible:
Restored state / acceptance for each destination / open items: