GLMedia — VX600 preset and backup worksheet
Proposed rehearsal; results left blank. VX600 model, not Pro.
Event / date / technician / operator / person approving:
Unit / serial / label / firmware / V-Can / PC:
Cabinet manufacturer / model / batch / receiving card / firmware:
Source / format / LED pixel matrix / region layout:
Approved content: file and version:

PRESET
Position / name / observed state / intended framing:
Initial Main and PIP screenshots / photos of center and edges:
Planned test / reversible change / initial configuration retained:
Result after recall (leave blank until tested):
Does the expected framing and letterboxing return? What differs?
Run-of-show positions and people authorized to change them:

EXPORTED PROCESSOR FILE
Source unit / date / firmware / application:
Path / name / extension / observed size / additional copy:
Procedure screenshot / file existence checked:
A saved file is not evidence of tested recovery.

CABINET FILES
Exact name / supplying manufacturer / matching model and batch:
Receiving card / version / documentation confirming the match:
Open questions for the supplier:

RESTORATION REHEARSAL (WINDOW WITHOUT AN AUDIENCE)
Destination unit / selected file / match verified by:
Alternative content path / operator / planned time:
Restart: documented. Observed duration: ______________
Checks: framing, layers, regions, signal and approved content.
Before / after evidence / differences / restoration of initial state:
Actual result / acceptance / open issues (leave blank until tested):

REFERENCE
NovaStar VX600 User Manual V1.5.0, section 5.5 pages 29–30 and chapter 7 pages 53–54.
Manual edition; record installed firmware and software above.
No physical test results are prefilled in this worksheet.