GLMedia — blank worksheet: Studio Camera Pro, reference, and network.
No tests performed. Write pending when a function has not been tested.
Event / date / operator / off-program window / backup / restoration method:
Manufacturer / exact model / generation / camera unit / internal version:
Exact converter: Studio Converter or 2110 IP Converter 4x12G PWR / unit / version:
Utility and package / operating system / USB or Ethernet / model appearing:
Do not confuse Blackmagic Studio Converter with ATEM Studio Converter.
Camera Setup 9.4 Beta and internal version 2.1 are case data, not installation instructions.
Manual edition / release notes / names of available controls:
Exact ATEM / firmware / format / camera input / ATEM Camera ID / PGM output:
Direct path: camera → camera or 10G port → SDI OUT → ATEM input:
Return: ATEM output → return 1 or PGM IN → camera:
Initial state: image at camera / converter LCD / final monitor / PGM / tally / voice:
Reference / exact Reference Source label / Master / PTP Lock / Receiver:
If a field is missing in that edition, record it; do not enter assumed values.
Network added: Studio Converter Control or PWR 1G ETHERNET / cable / switch:
Exact switch / firmware / port / configuration / IP and subnet / documented clock:
Single change / time / first state to change / time of image loss:
Removal of segment during testing / result / repetition / evidence:
Association with a segment does not equal a confirmed cause or repair.
PWR: via USB and Ethernet administration / recognized unit / reference when adding 1G:
The permission administers the converter; do not assume an IP bridge to cameras.
Detection of each camera / utility / protocol / control function checked:
Clip access: required protocol / permissions / URL / reading without deletion / result:
Second return: A on return 1 / B on return 2 / RET 2 LCD / exact HDMI destination:
Versions / where B arrived / where it is missing / actual or pending result:
Reference changes may interrupt output; prepare outside production.
Before factory reset: settings saved / certificate used / regeneration plan:
The manual warns that reset invalidates the camera certificate.
Result by function / evidence / open item / person responsible and date: