GLMedia — XR18/MR18: network control, active USB and recovery
BLANK TEMPLATE. Checks to perform; not evidence of a system test.

INITIAL STATE
Console / identifiable revision / firmware:
Control app / version / operating system:
Current scene saved at / date and state:
Recording or playback program / device / project / file path:
REMOTE: Ethernet / Wi-Fi Client / Access Point:
DHCP Client / DHCP Server / static IP:
Console IP / mask / gateway:
Router model / LAN port / DHCP enabled / console lease:
Control station IP / mask / SSID or LAN port:
Alternate wired station / access to the same console checked:

ADDRESSES AND LINK
DHCP Client requests an address from that network’s server.
Console DHCP Server: 192.168.1.1; clients 192.168.1.101–192.168.1.132.
Access Point: up to four simultaneous clients.
Ethernet without DHCP server: automatic console address within
169.254.1.0–169.254.254.255 according to the cited manuals.
A 169.254 address only on the computer does not identify console IP.
Actual address at both ends / mask / lease present or absent:
Initial cable and port / one variable to change / state to restore:
Before / after / new connection / missing information:

CONTROL LOST WITH USB ACTIVE
Transport state / time / meters / errors / intended listening:
Time control was lost / observed recording or playback state:
Preserve the active USB path while checking control.
Do not restart the console, unplug USB or change sample rate to test networking.
Attempt from prepared wired station / identified console / result:
Tablet: SSID / local permission / app connected / meters restored:
Mixer → PC receives console state; PC → Mixer writes from the computer.
Unit / synchronization direction / compared settings / result:

REHEARSAL AND FILE
Sample recording / planned control change / time of each intervention:
Take closed normally / file opened / complete listening:
Source | File | Start and end | Discontinuity or silence | Position | Coincident action
______ | ____ | _____________ | ________________________ | ________ | _________________
A running counter does not prove continuous recorded audio.

RETURN TO THE PREVIOUS LINK
Saved original values / alternate access mode:
Corrected parameter / previous value / new value:
Connection through alternate mode / configuration read from console:
Original REMOTE restored / IP and mask / intended station connected:
Correct unit / meters / mix preserved / restoration result:
If it fails: last change to check / alternate access restored:
Do not assume loading a scene restores network parameters.

CONTROL SCOPE
XR18: RESET 2 seconds, networking; X AIR V1.0 manual p.14.
MR18: RESET 2 seconds, networking; RESET 10 seconds, all factory settings;
MR18 guide 24/06/2025 Rev.0, printed page 20.
The cited 10-second scope applies to MR18: do not transfer it to XR18.
Initialize in Connection, X AIR/M AIR: initializes console and erases settings.
Initialize in GUI Preferences, M AIR: clears saved window layout.
Exact tab and control / applicable documentation / recovery copy:
Pending procedure / model information to confirm / next check:

REFERENCES
Behringer: X AIR User Manual V1.0, pp.14 and 28:
https://cdn-media.empowertribe.com/ffe0de45e14541f797928d639a8933b2/M_BE_0605-AAA_X-AIR_EN.pdf
Midas: M AIR MR18/MR12 User Manual, pp.12–13 and 27–28:
https://cdn-media.empowertribe.com/f4e89140f9994eed93e4f2a4e086c578/M_MI_0605-AAF_MR18-MR12_EN.pdf
Midas: MR18 Quick Start Guide, 24/06/2025 Rev.0, pp.20–23:
https://cdn-media.empowertribe.com/3a0cd685a2a4450993e03a09ddb34dc7/QSG_MI_0605-AAF_MR18_WW_2025-06-24_Rev.0.pdf
Help: https://glmedia.tech/technical-help/xr18-mr18-router-wifi-control/