8 × 4 ft illuminated platform: Milk Plexi

Identify the surface and intended use

Ask GLMedia about options for your event, subject to availability and evaluation of the configuration.

Nominal module and documentation

Nominal planning module

8 × 4 ft / 2.4384 × 1.2192 m

Material / selection

Milky polypropylene; not clear acrylic or mineral glass.

A nominal module size does not establish load capacity, permitted occupancy or suitability for dancing. Confirm the exact surface, support layout, finished height and intended activity with the manufacturer and responsible designer.

Compare options for the event

To select the effect, describe whether you want an even color, color changes or visible content across the floor. A diffusing surface and an image-controlled LED floor are different proposals. Compare the intended result from audience and camera positions; luminaires and control are coordinated separately from the surface and its support.

Deck, finish and supports

Specify the deck reference, surface variant, legs or understructure, connections, bracing, access and edge treatment as one assembly. Do not replace the top of an existing deck on the basis of size alone.

Draw joints, finished transitions, cable routes and any lighting below the floor. Coordinate equipment access and ventilation without removing supports or modifying the frame.

Checks before use

1. Identify the intended activity, footwear, simultaneous movements, furniture and equipment. Distinguish social dancing, choreographed performance and display use.
2. Compare delivered components with the applicable manual and project drawing before assembly; resolve missing parts or an unidentified surface.
3. Before release, check specified supports, connections, finish attachment and transitions. Isolate a raised edge, open joint, displaced panel or unresolved damage.
4. After acceptance, rehearse the approved activity with representative footwear and show lighting. Resolve glare, confusing edges or unsuitable surface behavior before the event.

Three technical questions

• Is Milk Plexi the same material as Clear Plexi?
• Does it include lights or LED control?
• How do we check uneven lighting or visible frame shadows?

Use and maintenance

Use the cleaning products and maintenance procedure specified for the identified surface. Do not add polish, solvents, adhesive films or coatings without confirming compatibility and the effect on walking or dancing.

Do not derive suitability for repeated impacts, heels, jumps or outdoor conditions from a static distributed-load rating. A rehearsal is not a structural load test.

Manufacturer references

• Manufacturer reference
• Surface options
• Manufacturer cut sheet

These references cover Staging Dimensions decks and surfaces. Confirm the exact delivered part reference and its documentation; the Milk Plexi name alone does not identify the complete configuration.