Stages and drape
8 × 4 ft transparent platform: Clear Plexi
Staging Dimensions describes Clear Plexi as clear acrylic, not mineral glass. This guide uses an 8 × 4 ft planning module; obtain the exact transparent-deck drawing and applicable supports before specifying an assembly.
Identify the surface and intended use
Ask GLMedia about rental options for your event. The proposal is subject to availability, confirmation of the model and configuration, and the venue’s technical requirements.
Staging Dimensions describes Clear Plexi as clear acrylic, not mineral glass. This guide uses an 8 × 4 ft planning module; obtain the exact transparent-deck drawing and applicable supports before specifying an assembly.
Nominal module and documentation
- Nominal planning module
- 8 × 4 ft / 2.4384 × 1.2192 m
- Material / selection
- Clear acrylic; transparency is an optical property, not a load rating.
A nominal module size does not establish load capacity, permitted occupancy or suitability for dancing. Confirm the exact surface, support layout, finished height and intended activity with the manufacturer and responsible designer.
Deck, finish and supports
Specify the deck reference, surface variant, legs or understructure, connections, bracing, access and edge treatment as one assembly. Do not replace the top of an existing deck on the basis of size alone.
Draw joints, finished transitions, cable routes and any lighting below the floor. Coordinate equipment access and ventilation without removing supports or modifying the frame.
Checks before use
- Identify the intended activity, footwear, simultaneous movements, furniture and equipment. Distinguish social dancing, choreographed performance and display use.
- Compare delivered components with the applicable manual and project drawing before assembly; resolve missing parts or an unidentified surface.
- Before release, check specified supports, connections, finish attachment and transitions. Isolate a raised edge, open joint, displaced panel or unresolved damage.
- After acceptance, rehearse the approved activity with representative footwear and show lighting. Resolve glare, confusing edges or unsuitable surface behaviour before the event.
Three technical questions
Is this a glass floor?
No. The manufacturer identifies Clear Plexi as acrylic. Use that material name in the specification; a request for mineral glass requires a separate product and design.
Can we remove a crossmember to hide the frame?
No modification is established by this guide. Obtain a documented solution for the exact transparent variant and desired lighting; do not use a plywood-deck drawing to authorize changes.
Can we dance on it because it is thick and clear?
Those properties do not establish dance suitability. Confirm intended movement, footwear, surface treatment and the complete support system. Isolate damage or movement and follow the manufacturer’s evaluation process.
Use and maintenance
Use the cleaning products and maintenance procedure specified for the identified surface. Do not add polish, solvents, adhesive films or coatings without confirming compatibility and the effect on walking or dancing.
Do not derive suitability for repeated impacts, heels, jumps or outdoor conditions from a static distributed-load rating. A rehearsal is not a structural load test.
Manufacturer references
Sources checked: October 22, 2026.