Audio
Meyer Sound ULTRA-X40
A self-powered point-source loudspeaker for designed main or fill coverage. This guide covers the documented analog model; identify GEN-1 separately.
Need this equipment for your project?
Ask GLMedia about rental, purchase or assistance with preparing, configuring or operating a compatible system. Share the date, venue, intended use and connected equipment; availability, configuration, location, price and terms are confirmed for the proposal. Mounting requires review using the exact documentation and qualified personnel.
Model and application
- Model
- Meyer Sound ULTRA-X40, analog documentation.
- Amplification
- Built-in amplification and processing.
- Nominal pattern
- 110° × 50°, depending on horn orientation.
- Audio
- XLR Input and Loop.
- Power connection
- powerCON 20 input and loop.
Do not transfer ULTRA-X42 or GEN-1 connector/control assumptions to this model. Identify the actual input module and horn orientation.
Connections and required equipment
Use suitable line-level XLR audio and the specified grounded power connection. Audio Loop repeats the signal path; it is not a substitute for a system-alignment design. Confirm the processor when independent subwoofer control is required.
Prepare the system
- Record module, horn orientation, processor routes and original settings.
- Protect listeners and check one source at a controlled level.
- Compare top/sub geometry and the intended design before altering filters, polarity or delay.
Questions and troubleshooting
The enclosure is powered but silent. Where first?
Check audio independently from power.
- Observe status and compare source output, mute and XLR Input.
- Lower the source before testing a known cable. Persistent startup/status faults require the manufacturer’s troubleshooting and service path.
- If the fault follows the known-good cable/source comparison, correct that upstream path and verify this enclosure at low level. If the same compatible source remains silent here, retain status/module details for service rather than opening the unit.
Does using Loop automatically set the right crossover?
No universal top/sub alignment follows from cable order.
- Identify whether both systems receive the intended signal and any external processing.
- Follow the manual’s configuration conditions and measure alignment for separated or advanced layouts. Do not copy a forum’s filter or polarity recipe.
- If top and sub work separately but their combination loses energy, request alignment measurement rather than adding gain. Verify both separately and together after the agreed processing correction; unresolved cancellation belongs with the system technician.
Why is coverage different after repositioning?
Horn orientation and placement affect the nominal pattern.
- Compare actual orientation and the coverage design before EQ.
- Mechanical rotation or mounting changes require the exact procedure and responsible technician; do not improvise on an energized or suspended unit.
- If the changed coverage matches the new orientation, check the intended listening areas against the design. After any authorized correction, recheck those same positions at controlled level; unexpected differences require measurement and inspection by the responsible technician.
Choose the next check
| Observation | Next check | What to record |
|---|---|---|
| Powered but silent | Status and XLR Input | Source/mute/cable |
| Top/sub overlap | Geometry and processing | Filters, polarity, delay |
| Coverage changed | Horn and placement | Orientation/design |
Precautions
- De-energize before connecting or disconnecting powerCON 20. Keep earth intact and size power distribution for the actual circuit; no universal loop count.
- Reduce signal during persistent limiting; never bypass protection.
- Use exact mounting documentation and qualified handling; no opening or ad hoc horn procedure here.
Official documentation
Match the exact model, version and system before applying settings.
- Meyer Sound — ULTRA-X40 — Model/generation identification.
- Meyer Sound — ULTRA-X40 datasheet — Analog model specifications and horn orientation.
- Meyer Sound — ULTRA-X40 Operating Instructions — Audio Loop and Using a Processor sections.
Related help
Help us improve this guide
Is an explanation missing, did you find an error, or did you solve something differently? Tell us on WhatsApp.
WhatsApp opens with an editable draft. Review it and send it if you choose. Do not include passwords, keys or client information. Contributions are reviewed before being added to guides; they are not published automatically.