nivtec Standard 200 × 100 cm: from stage sketch to proposal

Start with the desired working area and where people and equipment must move. A grid count gives panel geometry, not the total installation footprint: access, protection, waiting space and circulation add requirements. We can compare a simpler rectangular arrangement with the requested outline before finalizing the material list.

It is a manufacturer setup principle tied to platform orientation, connection and the exact documented layout. It is not permission to remove supports from an existing stage. Height, base type and use can change the required parts and bracing; request the complete scheme rather than applying a percentage saving.

Record weights, contact points, positions, motion and rhythmical activity. The manual treats high point loads and rhythmic loads as cases requiring additional system-specific rules. A catalogue area-load figure does not settle those cases. If the proposed assembly is undocumented, compare an alternative position or a separately documented support solution before use.

The 2026 instructions limit outdoor use to short periods and require protection from direct sunlight and moisture, with prompt drying if damp. The panel is water-resistant, not waterproof or weatherproof. Ground support, drainage and the event weather plan remain separate decisions. Do not apply these statements to the 9 mm Indoor version.

Keep the area unloaded and out of use. Compare identity, tongue-and-groove orientation, edge condition, debris and the support layout with the exact instructions. Do not force, drill or bridge the connection. The manual does not permit combining the nivtec system with other staging systems; visual fit does not establish compatibility.

No. They are evidence for their stated configuration and scope. European certification does not automatically approve a Florida installation. Start an inquiry with date, venue, activity and an approximate size; we can develop sourcing, layout and installation options, then confirm the actual references, project review, access and availability.

List what changes: occupied furniture, displayed product, contact points, movement, video and lighting. Compare a fixed speaking platform with a separate documented display area before assuming the same stage serves both. We can quote a layout comparison and a technical review of the proposed assembly. A manufacturer’s vehicle presentation using acrylic platforms does not document vehicle loads on this 12 mm plywood Standard platform.

Ask for separately identified scopes: platforms and documented supports; installation, protection and access; then audiovisual equipment, rehearsal and show assistance. Both options must include everything necessary for their intended safe use. We can compare simpler geometry or fewer scene changes, rather than reducing required supports or protection to meet a budget.