Shure UA844+SWB — manual 4.2 (2025-D)
Distributor RF connections, power and variants. PDF page 4 identifies UA844+SWB; this is not the UA874 antenna manual.
Organize receiving antennas for a wireless microphone rack and plan coverage you can check before doors open.
Tell us how you plan to use it, along with the date and venue if known. We can assess equipment, integration, preparation, and technical support. The proposal will confirm configuration, availability, and terms.
For a multi-mic panel or band, shared antennas can simplify the rack. Start with the frequency bands of every component and the stage layout rather than an arbitrary gain setting.
If several receivers fail together, inspect their common antenna, power and coax path first. If only one fails, compare its A/B branches and transmitter. For overload indications, review levels and placement; adding gain can make the problem worse.
For a few channels over short distances, evaluate compatible local antennas. A wired microphone can cover a fixed presenter. Additional racks need an engineered cascade based on the manual rather than improvised splitters.
Start with rack and stage photos, the event program, or a rough diagram. If available, add receiver models and bands, cable runs, and the simultaneous channel count. We can use that information to assess antenna distribution, RF coordination, and technical support; the proposal will specify the configuration and availability.
No. It is a receiving antenna; monitor transmitters require a different compatible solution.
Not necessarily. Base gain on losses and levels and schedule a walk test before the audience arrives.
It does not replace coordination. Review permitted spectrum, simultaneous transmitters and the event RF environment.
23/10/2026
Documents are in English. Reader controls follow the language of this page.
Distributor RF connections, power and variants. PDF page 4 identifies UA844+SWB; this is not the UA874 antenna manual.
Official guide titled UA874Z. Page 3 distinguishes US, E, WB, Z16, Z17, Z18, X and XA variants. Before applying a frequency range, check the antenna suffix and its match to the receiver.