Audio
Yamaha TF1
A digital console for local sources and compatible remote I/O. Confirm the expansion card and rack before planning a Dante signal path.
Need this equipment for your project?
Ask GLMedia about rental or purchase options and advice on a compatible configuration. Availability, configuration, location, price and terms are confirmed for your request.
Model and application
- Manufacturer / model
- Yamaha TF1.
- Mixing channels
- 32 mono + 2 stereo + 2 return mixing channels.
- Local analog I/O
- 16 local combo inputs; 16 XLR outputs.
- USB audio
- USB audio: 34 inputs / 34 outputs at 48 kHz.
- Surface / expansion
- 16 + 1 master faders; optional NY64-D for Dante.
Local sockets and mixing channels are different counts. The control-network connector is not a substitute for an installed Dante card.
Connections and required equipment
Use local inputs/outputs, rear USB TO HOST for a computer, and the distinct top-panel USB functions for playback or console data. Remote Dante I/O requires NY64-D and a compatible rack; confirm versions rather than transferring another rack’s setup.
Prepare the system
- Save the show and record card, rack, firmware and topology.
- Protect outputs; trace one agreed input through channel, bus and physical destination.
- Compare Quick Config and actual routes before changing either; coordinate shared devices.
Questions and troubleshooting
The rack is visible but the channel is silent. What next?
Device visibility does not select the channel input.
- Confirm NY64-D and the intended subscription.
- Compare INPUT SELECT with SLOT, then channel and bus meters. Test one protected route without rebuilding the network.
- If selecting the agreed SLOT source restores the channel meter, the selection was the missing stage; verify bus and physical destination next. If it remains absent, record subscription, clock and rack input state for the network operator rather than resetting Quick Config.
Audio passes but rack gain is unavailable. Why?
HA control and audio transport are separate.
- Identify the rack model and its permitted control arrangement.
- Inspect HA Control in SLOT SETUP and coordinate with other operators. Do not toggle Quick Config blindly or use phantom as a test.
- If meters and audio pass while HA remains unavailable, keep the working route and investigate control compatibility/ownership. Verify one agreed gain change outside the show; stop if another console shares the preamp or control remains unexplained.
Why does the USB device not do the expected job?
The rear computer port and top-panel playback/data ports have different roles.
- Identify computer audio, playback or show-data storage first.
- Compare the correct connector, source selection and computer routing. Save existing data before any load operation.
- If the intended source meter appears on the correct port, the connector/source mismatch is resolved; verify playback at the destination without loading show data. If the computer still detects no supported interface, record OS, driver, cable and settings for Yamaha support.
Choose the next check
| Observation | Next check | What to record |
|---|---|---|
| Visible rack, no channel audio | SLOT | Card and input port |
| Audio without gain control | HA Control | Rack and controlling console |
| Unexpected USB behavior | Port role | Computer, playback or data |
Precautions
- Check actual mains rating, earth and ventilation; no internal work.
- Protect outputs before patch or phantom changes.
- Keep shared routes intact; firmware changes require a separately prepared maintenance window.
Official documentation
Sources consulted October 22, 2026. Match the exact model, version and system before applying settings.
- Yamaha TF Series — Specifications — TF1 column; capacities and connectors.
- Yamaha TF — official FAQ — USB roles and Quick Config.
- Yamaha TF Quick Guide — SLOT and HA Control troubleshooting.