Lighting and control
ENTTEC DMX USB interface — model to be confirmed
Identify the ENTTEC interface and the software you need to control the lights. The exact model remains unconfirmed; this page guides preparation without assigning it functions or compatibility from another interface by the same brand.
Identification and scope
- Manufacturer or brand
- ENTTEC
- Equipment designation
- ENTTEC DMX USB interface
- Location
- Ask about availability and location
- Availability for the project
- To be confirmed for the requested date and scope
The DMX USB designation is not enough to choose a driver or confirm the interface’s functions. Check the model and manufacturer documentation before installing software or applying settings.
Details to prepare this item
- Full interface model and revision, operating system, control software and versions to be used.
- Required DMX universes and functions, USB/DMX path, power and accessories supported by the manufacturer for that model.
If possible, share a legible photo of the label and connections, or the relevant manual. The brand and USB connector alone do not confirm supported software, available universes or input and output functions.
Prepare a diagram from the computer and software through the interface to the fixtures, with intended modes and addresses. Once the model is identified, documented compatibility can be reviewed and an off-show detection and control test agreed before the event.
Topics to discuss
- Interface and control software
- Universes and addresses
- Scene control
- Signal and power faults
Before applying settings, identify the complete equipment variant and consult its manual.
Continue your inquiry
- Event lighting: faces, audience and effective scenes
- Fixture profile and DMX mode: check the patch before programming
- LED fixtures flicker with DMX: what to check and how to test
These guides explain related tasks. Check the model each one covers before applying its settings to this equipment.