SICO Starlight II: plan an outdoor dance floor

No. The product’s material claim does not override the linked manual’s prohibition on using a wet floor. Plan who closes the area, where guests go and who checks conditions before reopening. Indoor relocation is an alternative to agree before the reception.

The outdoor name does not approve every supporting surface. Record slopes, soft areas, drainage and entry transitions; ask for a documented base solution for the site. Do not use loose packing or panels to bridge a depression. Compare another location if the base cannot be resolved.

SICO lists factory panel options with tent-pole holes and smaller panels. Obtain exact pole positions, the supplied floor references and the tent layout before selecting pieces. Do not cut standard panels or attach floor hardware to the tent as a generic solution.

Keep the affected area out of use. The linked instructions prohibit specified gaps of 1/8 in (3 mm) or more, unlocked or missing trim, damaged panels and uneven surfaces. Review the supporting surface and component condition with the supplier; covering the gap is not a repair.

SICO distinguishes indoor Cam-Lam from Starlight II, which is offered for indoor and outdoor use with a different core construction. Choose by exposure and accepted supporting surface, not appearance alone. An elevated stage is a separate assembly with its own supports, access and loads. These alternatives do not establish interchangeable panels or accessories, and outdoor capability does not permit wet-floor use.

Date, location, activity and an approximate area are enough to start. Add site photos, surface description and a weather fallback if known. We can compare locations, floor variants and installation scopes, then confirm the exact base, trim, access, schedule and availability. Outdoor flooring does not remove the need for an event weather plan.

Compare the planned outdoor dance area with an indoor location that can receive the actual activity. Identify the decision-maker, the latest workable decision time and any separate equipment or labor to reserve. The proposal can distinguish the main scope, optional reservations and changes that trigger a revised quote. Confirm any extra transport, setup or cancellation terms before booking. A tent or another location does not permit wet-floor use.

Yes, we can assess a defined floor scope. Share the other supplier’s equipment positions, cable paths and work schedule so installation and public access can be coordinated. The proposal should identify responsibility for base preparation, floor inspection and weather monitoring, with additional AV or technical assistance quoted if requested.

The Starlight manual linked by SICO describes temporary outdoor use and limits the surface temperature to 160°F (71°C). That is a manufacturer’s upper technical limit, not a temperature endorsed for comfortable or safe dancing. Match the linked instructions to the supplied Starlight II reference.

For an afternoon reception, we can compare another accepted location, a different dance schedule or the agreed indoor fallback. Include who checks surface conditions and who closes and reopens the area. If heat conditions cannot be controlled, keep the affected floor out of use until the responsible team resolves the plan. A dry floor still needs all other checks; wetting it is not a workaround because the manual prohibits wet-floor use.