Rigging and power
ELPH2-01000-100 PH2 — 1 t manual chain hoist
Plan the hoist together with the load, supports and accessories for the intended setup. The recorded capacity reference must be checked against the unit’s nameplate and documentation; the assembly requires a qualified person’s review.
Identification and scope
- Manufacturer or brand
- Check the identification on the unit
- Equipment name
- ELPH2-01000-100 PH2 — manual chain hoist, 1 t reference
- Location
- Ask about availability and location
- Supply for the event
- Ask about options for the planned date and scope
- Configuration or function
- PH2 manual chain hoist, 1 t capacity reference. Confirm the nameplate, inspection and lift height for the setup.
You can start with the intended use, date and location even if you do not yet have every reference or measurement for the setup. We will review equipment identification, assembly information and supply options.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Intended load configuration, height, supports and accessories, with a qualified person’s review of the actual assembly.
Identify the unit and its documentation
Record the hoist manufacturer, full model, nameplate and documentation, together with identification of the intended chain, hooks and accessories. Gather the inspection record and applicable usage conditions for technical review.
The 1 t reference alone does not define the capacity of the complete setup. Lift height, supports and assembly components must be reviewed for the proposal; they cannot be inferred from the record code or the unit’s appearance.
Prepare the details of the intended setup
| Point | What to record | How to proceed |
|---|---|---|
| Unit and inspection | Nameplate, documentation and inspection of the proposed unit | Confirm references for the qualified person’s review |
| Application | Intended load, height, location and setup conditions | Review the assembly and the information needed to define the proposal |
| Components and supports | Chain, hooks, supports, accessories and observed condition | Resolve missing pieces or discrepancies against the documentation with the qualified person responsible |
If identification, documentation or an intended component is missing, record the discrepancy for assessment by the qualified person before use. This page prepares the inquiry; it does not document an inspection or describe an installation, lifting or lowering sequence.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.