Get a quoteStructure · distribution · support
Rent support, rigging and power-distribution components, or add preparation, delivery, setup, testing, operation and removal. We help you choose the configuration and coordinate access, power and schedules with your production team and venue.
Only name, email and message are required in Contact. An editable reference is carried into the form; you can inquire while models, dimensions or venue details are still pending.
Choose the components or technical work you need: equipment rental, setup or crew for your event. We set out the equipment, tasks and schedule in the proposal so you can compare the options.
Rent components prepared for your crew to install and operate, including cross-rental for AV companies. We review compatibility, documentation and availability for your date with you, and you can add delivery and pickup.
Ask about equipment onlyWe prepare and deliver the equipment, carry out the setup, connections and testing you choose, and arrange removal after the event. We coordinate access and schedules with your production team, the venue and the crews involved in the installation.
Ask about setup and removalYou can add technical crew for setup, rehearsals or operation during the event. We plan the tasks and schedule with you. If you already have equipment, we review its connections, controls and configuration to prepare our crew’s work.
Ask about technical crewWe can prepare the support and power distribution alongside the equipment you plan to install, bringing connections, setup and testing into one coordinated plan.
Ask about several systemsTo prepare the setup, we review the configuration, loads and venue approvals. We identify the documentation needed for the installation and coordinate its review before setup, while checking equipment for your date.
If you need a surface for speakers, performers or an audience, also see stage decks and platforms. Support behind an LED wall serves a different purpose.
See stage decks and platformsYou can start with a setup idea, without model numbers or a final drawing. We help you choose components based on the loads, space and access, and identify the approvals needed to install the system.
We can assess a ground-support setup for the screen in your room or on your stage. Tell us the approximate size, height and available rear space. We review compatible components, loads, stability and access for setup and service.
Ask about ground supportTell us which screen or equipment you want to fly. We review the load plan and approved points with the venue’s rigging contact, and coordinate any venue-required provider before preparing the setup.
Ask about flown systemsFor LED, audio, lighting and processing. Start with the systems list and what you know about available outlets; if you do not have electrical details, we can coordinate with the venue’s technical contact.
Ask about power distributionFor hotels, service elevators or routes with tight turns. Describe access and working hours; actual dimensions and weights determine whether the components and cases can travel the route.
Ask about access and setupWhat it does
GLMedia can supply the LED, its original manufacturer support hardware and the deployment infrastructure around it. Flown and ground-supported systems are selected from the venue rules, approved loads, access, schedule and operating plan.
Each inquiry link opens Contact with your selected topic. You can edit or remove that reference and describe what you want to do, even if you are still choosing the equipment. Contact also offers email and WhatsApp.
Send the date, venue, setup and removal times, dimensions and weight of the screens or equipment to be supported, and what another supplier provides. Tell us whether you need equipment only, preparation, installation or operation of the agreed systems. Include any plans, loading-route details or venue power information you have; you can start the inquiry while some details are still pending.
You can attach plans or photos in Contact; the form lists the supported formats and file limits. If you have another type of document, tell us what it is and we can arrange how to share it. You can also start your inquiry without files.
These links prepare a general rigging and power subject. Add the details and send from your app; they do not include your draft or equipment list.
For InsightsEDU 2026 at The Westin Fort Lauderdale Beach Resort, GLMedia installed a 15 × 5 m LED wall with original Unilumin ground support. View the installed screen and how the support fitted into that room.
See GLMedia’s installationAsk about ground support for my venueOwned one-ton chain hoists, original Unilumin hanging and ground-support hardware, Tyler Truss, Thomas Truss, Global Truss, ModTruss, certified lifting accessories and certified riggers.
The screen support is planned with the same care as the LED canvas. GLMedia can deploy a flown wall, an original Unilumin ground-support system or a truss-based structure according to the venue and approved design.
Owned one-ton entertainment chain hoists, controllers, original Unilumin hanging bumpers, certified slings and shackles, and certified GLMedia riggers can be included in the contracted scope. Venue-appointed or licensed specialists are integrated when required.
Original Unilumin ground-support frames, quick connections, rear braces, service platforms and guardrails allow several technicians to work in parallel across a large screen. GLMedia owns enough compatible original platform modules to position a rear service platform approximately every 2 m along an approved Unilumin ground-stacked configuration, helping distribute qualified technicians across wide builds. This can reduce serial work from a single ladder or lift and shorten installation and strike.
Owned structural inventory includes Tyler Truss 12x12 bolt-together sections in 10 ft, 8 ft and 5 ft lengths with cubes, bases, bolt sets and dedicated dollies; James Thomas Engineering (Thomas Truss) 12x12 sections; and Global Truss components. ModTruss 6x6 aluminum adds a separate modular structural family. Exact series, lengths, connection type and quantities are confirmed for the quote, and components from different manufacturers are not assumed interchangeable.
Owned ModTruss 6x6 aluminum components use bolted connectivity on all six sides, creating a flexible structural toolkit for LED support, scenic frames, work platforms and custom technical layouts.
Safety and approval: we plan the rigging plot, load review and manufacturer limits together with the venue approval, engineering and licensed work required for the specific project.
For large-format LED walls, the support and assembly method can influence the production schedule as much as the number of panels. GLMedia stocks original Unilumin ground-support systems—also described as ground-stacked LED support when the wall is built from the floor—for compatible Unilumin LED families. Using the manufacturer’s original rear frames, braces, quick connections, service platforms and guardrails provides a documented, manufacturer-matched system basis instead of an improvised generic structure. The modular architecture can reduce repeated handling and allow qualified technicians to work simultaneously on cabinet connection, alignment, power, data and inspection. GLMedia owns enough compatible original platform modules to position a rear service platform approximately every 2 m along an approved Unilumin ground-stacked configuration, helping distribute qualified technicians across wide builds. This can shorten load-in, setup and strike, reduce dependence on one ladder or lift, and maintain organized rear access during service. Original hardware supports compatibility and technical traceability; the final configuration still follows the panel model, wall height, loads, floor capacity, ballast or anchoring, egress, fall protection, engineering and venue approval.
With rear support frames, quick connections and continuous access behind the wall, technicians can be assigned to different sections of a large canvas at the same time. Cabinet connection, data and power dressing, alignment, inspection and service preparation do not have to wait for one ladder or one lift to move from bay to bay. The result can be a shorter build and strike window, especially on wide ballroom, convention and arena screens.
Compatible Unilumin ground-support structures can incorporate rear platforms, braces and guardrails so qualified technicians have a defined work position instead of repeatedly climbing and repositioning loose ladders. This can reduce exposure to ladder work, improve access to upper cabinets and cable paths, and support more orderly inspection and maintenance. The final work-at-height method, fall protection and crew limits still follow the approved plan and venue rules.
Modular Unilumin support components and 6x6 aluminum ModTruss can travel in shorter sections than 10 ft truss. That may make a service elevator usable and remove the need for a forklift or material lift, but only after checking the complete route. We need the clear door opening, elevator cab dimensions and rated capacity, plus corridor turns and floor-protection requirements. Use the dimensions and loaded weights of the actual cases and components: a piece that fits inside the elevator may still be impossible to turn through its doorway.
Planning requirement: GLMedia reviews loading dock access, door and elevator dimensions, cab weight limits, hallway turns, ballroom access, approved work hours, floor protection and the setup/strike window before selecting long truss, modular structure, flown support or ground support.
Current inventory reference
We confirm the models, quantities and availability for your event date before finalizing the equipment package.
Use this list to identify the components you are interested in. When a row includes several models or parts, tell us which ones and how many you need, or ask us to help choose them. We review the selection with you, check availability for your date and prepare the configuration and approvals needed for the setup.
Ask about components and compatibility2 large · 2 medium · 2 small power-distribution units
8 large Socapex distribution units · 8 general EU-connector distribution units
24 × 611 motors · 10 × V6 motors · 3 motor controllers · selected-unit documentation and application confirmed before use
10 ft, 8 ft and 5 ft bolt-together sections · dedicated dollies for efficient arena and touring deployment
12 cubes / corner blocks · 12 base plates · multiple complete bolt sets · final configuration follows approved manufacturer data
Owned 12 × 12 in truss sections · exact lengths, connection type, series and available quantities confirmed for the project
Owned truss components · exact family, profile, connector type, lengths and available quantities confirmed for the project
360 ground-support components · 199 support grids · 388 connection rods · quick-connect architecture for compatible LED families
134 one-meter double bumpers · 156 rear support bases · 79 half-meter single bumpers for compatible Unilumin LED systems
574 connectors
Owned slings, shackles and rigging hardware selected and verified against the approved rigging plan and current records
Owned modular bolted structural components with connection options on all six sides for adaptable LED, scenic, platform and support applications
Socapex, Cam-Lok, breakout, extension and network cable · lengths and connector types confirmed per project
Service options and technical planning
Frequently asked
Practical answers for hotels, convention centers, arenas and production partners.
GLMedia owns one-ton MODE entertainment chain hoists, controllers, original Unilumin hanging bumpers, certified lifting accessories including slings and shackles, and compatible LED inventory. We can prepare the system with certified GLMedia riggers and coordinate any venue-appointed or licensed providers required by the venue or jurisdiction.
Yes, when the approved design and venue conditions allow it. Original Unilumin ground-support components, rear frames, platforms, guardrails and quick connections can create organized rear access for multiple qualified technicians and reduce dependence on ladders or lifts. GLMedia owns enough compatible original platform modules to position a rear service platform approximately every 2 m along an approved Unilumin ground-stacked configuration, helping distribute qualified technicians across wide builds. Dimensions, ballast, floor loading, egress, fall protection and engineering are reviewed per project.
It may be possible with modular components, but it depends on the route. Unilumin ground-support components and 6x6 aluminum ModTruss can be transported in shorter sections than 10 ft truss. Check the loading area, clear door openings, corridor turns, elevator cab dimensions and rated capacity against the actual cases and components. Send the venue’s loading rules and available elevator times as well. This can reduce handling and may avoid a forklift or material lift where access permits; we confirm the method after the access review.
GLMedia stocks Tyler Truss 12x12 bolt-together sections in 10 ft, 8 ft and 5 ft lengths with cubes, bases, bolt sets and dedicated dollies; James Thomas Engineering (Thomas Truss) 12x12 sections; Global Truss components; and 6x6 aluminum ModTruss modular components. Exact series, connection types and quantities are confirmed for the quote. Components from different manufacturers are not assumed interchangeable, and structural use follows the correct manufacturer data and approved plan.
Tell us the event date and venue
For a small setup, a wall outlet may be enough. We review the equipment and the venue’s electrical installation to plan distribution: voltage, circuit capacity, connector types and outlet locations. The review covers LED, processing, audio and lighting, plus catering or other equipment sharing those circuits. If you do not have the electrical details yet, we can work with the venue’s technical contact to obtain them. We use that information to identify the circuits needed and coordinate connections with the venue and qualified personnel under the venue’s rules.
Ask about power and circuitsWe can start with current plans and photos to review screen position, access and power locations. Images of the loading area, service elevator and route into the room are as useful as those of the stage. For restricted access, unusual screen shapes, outdoor structures or a permanent installation, we assess whether an on-site visit is needed. We agree on its purpose, timing and any cost with you before the visit. We use the findings in the setup plan and also coordinate the structural or electrical approvals required for the installation.
Ask about access and a site reviewWe coordinate our crew details with the organizer or venue to submit credentials by their deadline. We also review the service entrance, check-in point, permitted hours and unloading authorization. The event or its security team approves the technical credentials for work access; these are separate from guest tickets.
You can choose whether Google Analytics and Google Ads measure visits and actions on this page. Service information and inquiry links work with either choice.
You have not chosen yet: the measurement tag will not load on this page until you accept.