Rigging and power
Eurotruss FD34-200 — 2 m truss
Plan the truss section within the system drawing: components, connections, supports and intended items. The FD34-200 reference helps identify it; review the actual configuration using its documentation and with the qualified person responsible.
Identification and scope
- Manufacturer or brand
- Eurotruss
- Equipment name
- Eurotruss FD34-200 — 2 m box truss
- Location
- Ask about availability and location
- Reference quantity or measurement
- 7
The value 7 is a reference in the record and does not confirm available quantity for your date. You can start with an idea of the setup and space, without a final plan or component list.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Planned sections, connections, loads, geometry and supports, with review by the qualified person responsible for the actual configuration.
Match the section to the system
Gather identification and documentation for the FD34-200, 2 m, together with references for the other planned sections, connections and accessories. A component’s length and a shared brand do not by themselves define the capacity or compatibility of the complete setup.
Prepare the details of the intended setup
| Point | What to record | How to proceed |
|---|---|---|
| Components and connections | Models, lengths, identification and accessories for the planned sections | Confirm that the system matches the applicable documentation |
| Geometry and supports | System drawing, dimensions, connections and support locations | Review the actual arrangement with the qualified person responsible |
| Loads and use | Planned items, documented loads and their locations within the system | Complete the details needed to assess the proposed configuration |
If component identification, documentation or setup details are missing, record what is needed for technical review. This page prepares the inquiry; it does not establish capacity, compatibility or inspection of the system, or describe an assembly or lifting sequence.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.