Rigging and power
Feeling truss cube or junction block
Plan the junction block within the truss system drawing. Identifying the component, its connections and the planned sections helps review setup geometry and the documentation applicable to the system.
Identification and scope
- Manufacturer or brand
- Feeling
- Equipment name
- Feeling — truss cube or corner block
- Location
- Ask about availability and location
- Reference quantity or measurement
- 12 units
- Configuration or function
- Truss cube or junction block.
The 12 units are a reference in the record and do not confirm availability for your date. You can start with an idea of the setup and space, without a final plan or component list.
Information to prepare this item
- Component identification, nameplate and documentation; actual assembly configuration.
- Planned block, sections, connections, loads, geometry and supports, with review by the qualified person responsible for the actual configuration.
Identify the block and its connections
Gather component model, identification and documentation, with the connections and orientations planned in the drawing. Add section and accessory references to review the system match; the name cube or block does not by itself define permitted configurations.
Prepare the details of the intended setup
| Point | What to record | How to proceed |
|---|---|---|
| Component and connections | Model, identification, connections and documentation for the proposed block | Confirm component references and documented configurations |
| Sections and arrangement | Truss, connections, accessories and component orientation in the drawing | Review the system match against its documentation |
| Loads and supports | Planned items, loads, geometry and setup supports | Review the actual system with the qualified person responsible |
If block identification, connections or setup details are missing, record the information needed for technical assessment. This page prepares the inquiry; it does not establish capacity, compatibility or inspection of the system, or describe an assembly or lifting sequence.
Topics to discuss
- Component identification
- Configuration and documentation
- Assembly coordination
- Inspection and recordkeeping
Before applying settings, identify the complete equipment variant and consult its documentation.
Continue the inquiry
- What to coordinate with the hotel or venue before AV setup
- Event stages: choosing size, height and access
These guides cover related tasks. Check the model each guide addresses before applying its settings to this equipment.