Immersive studio shoot
LED environment designed for a music-video production.
Virtual production · Music video · Miramar
For this music-video shoot in Miramar, Florida, we combined two Unilumin LED walls, a walkable LED floor, studio lighting and multicamera capture.
The studio setup
The display environment used Unilumin URMIII P2.6 LED walls and a Unilumin UDF P5.2 walkable LED floor. Together they provided approximately 409 sq ft (38 m²) of mapped image surface across three planes.
We used Sony FX30, Sony FX9 and Panasonic PTZ cameras. The work also included studio lighting, audiovisual production and post-production.
LED environment designed for a music-video production.
Filmed at GLMedia TV Studio.
Combined wall and floor image surface.
Two fine-pitch camera-facing wall surfaces.
Walkable mapped display surface.
FX30, FX9 and PTZ capture documented for the shoot.


The video shows the mapped LED surfaces, the studio setup and the finished set. It has music but no spoken narration; a visual description follows below.
The video opens inside a three-plane LED environment with mapped content extending across the left wall, rear wall and walkable floor.
It shows the performer, studio lighting, camera positions and multiple visual looks created by changing content across the synchronized surfaces. The closing shots document the complete LED room and the capture workflow.
This page describes the equipment and production setup documented for this shoot. It does not claim ownership of the music, performance, third-party creative material or any rights not expressly held by GLMedia.
Music videos, branded content and camera production
Share the creative reference, camera plan, content format, schedule and required deliverables. GLMedia can define the quoted LED, video, camera and technical-production scope.
Plan a studio production