Lighting and control
Chauvet Professional WELL Fit
Prepare the original WELL Fit with a compatible transmitter, correct profile and upright charging; distinguish fixture from charging case.
Ask about renting or buying with your date, venue and photos of the space, even if the fixture count is still open.
Model and purpose
- Manufacturer
- Chauvet Professional
- Model
- Chauvet Professional WELL Fit
- Variant
- Original WELL Fit, RGBA LEDs and internal battery
- Control
- W-DMX, infrared and local panel
- Charging
- Compatible case or charger; 100–240 VAC, 50/60 Hz depending on system
- Protection
- IP65 temporary outdoor use; no immersion
A compact uplight for accenting walls and décor without cables during battery operation. Its reflective finish helps it blend into the setting. Confirm the original WELL Fit: WELL FIT X and other family members have their own accessories and conditions.
Ask about a specific wall or column
To assess WELL Fit on a wall or column, a photo and approximate height are more useful than standard spacing. Surface color, texture, ambient light and available floor positions change the result. We can assess accents or a more continuous wash, leaving quantity and spacing for a proposal supported by a color test.
- State the intended color and total use time, including checks and waiting. Compare the planned look with actual battery condition and charge; a nominal figure does not guarantee the same duration at every intensity.
- Confirm original WELL Fit, charger or case and included accessories. For changes during the event, identify a compatible W-DMX transmitter and operator; the charging socket does not receive DMX.
- Test the effect on a representative surface and review stability, traffic and exposure. Before planning a suspended unit, ask the manufacturer to confirm the exact secondary safety attachment point and mounting arrangement for that unit.
Questions to define your proposal
- Which wall or area should stand out, and what color is it?
- Does the event start in daylight or controlled ambient light?
- What duration and color changes are required?
- Is a compatible W-DMX transmitter available, and who charges units?
A solution to assess with GLMedia
We can assess WELL Fit positions and colors for the room, checking surface, ambient light, duration and control with a sample before finalizing quantity. The proposal separates fixtures, charging and operation. If daytime impact or runtime is unsuitable, we can compare another solution or reserve the accents for nighttime.
With that information, GLMedia can help assess equipment or alternatives and quote placement, color adjustment, configuration or operation for the part you need help with.
Features and connections
The retractable foot aims the beam from the floor. Place it securely outside traffic routes; the charging socket is not a DMX input.
The single fixture and case package are different offerings. Confirm the required charger and the accessories actually available.
Emitters are red, green, blue and amber. An RGBW personality can move controls without correctly representing the fourth color.
Prepare the system
- Inspect housing, contacts and charger; do not use a damaged battery. Charge upright in an open, ventilated case before planning runtime.
- Prepare a compatible W-DMX transmitter receiving DMX data from the console. Enable Wireless Setting > Receive and check link and signal strength on every fixture.
- Select DMX Channel and address to match the patch. Record Information > Version and test color and intensity before distributing fixtures.
Questions and troubleshooting
Radio will not link: is the signal compatible or is an old transmitter still paired?
W-DMX requires a compatible link; another system labeled “wireless DMX” is not sufficient.
- Confirm Receive is On, the transmitter is powered and its DMX input is correct. Move a fixture closer to separate range from configuration.
- To change transmitters, use Receive Reset on the fixture and the transmitter’s linking procedure. Do this during preparation: transmitter reset can affect other receivers.
- Check signal from the final position with expected obstructions. People and water masses can block the path; do not treat ideal range as a guarantee.
Record transmitter model, Receive setting and link state before resetting. A controller working with another brand does not establish compatibility with this receiver; if failure occurs only in the final position, investigate the radio path too.
Do intensity or colors differ from the console?
Compare the complete personality and control positions.
- 4Ch controls RGBA without a separate master dimmer. In 6Ch, dimmer is 1, colors are 2–5 and strobe is 6.
- In 10Ch also check the macro and automatic program. For a check without effects, neutralize them according to the chart; strobe uses 0–10 for no function.
- If infrared alone fails, check IR Setting and remote reception. Do not switch to a white-emitter profile to fix the amber channel.
No startup on the charger, or short runtime?
Separate a depleted battery, paused charging and program consumption.
- A depleted battery can require a few minutes charging before startup. Check contacts and case power; do not tilt it for charging.
- Charge at 0–35 °C with the lid open; do not exceed 24 hours. For abnormal heat or interrupted charging, stop using it and request service without opening the fixture.
- Record initial charge and program for an advance test. Published times depend on use; include setup and testing in the battery budget and avoid depletion.
How many WELL Fit units should color a room or wall?
We can assess a layout around surface, height, material color and the intended look: separated accents or a more continuous wash. Spacing follows geometry and a sample, rather than a fixed fixture count per room.
- Send a photo or sketch, camera coverage and audience routes. Compare positions and levels while maintaining ventilation, stability and clear circulation.
- For wider coverage or people lighting, compare another wash type or dedicated light, with setup and operation. The proposal distinguishes decoration from the light needed to see the presenter.
Can they cover a fixed-color reception followed by a changing show?
A local reception look and a compatible console-driven W-DMX route can be planned, with preparation and checks before the event. Battery and control need separate verification.
- Count powered time from switch-on to finish, including waiting, using actual colors and levels. Nominal battery figures do not guarantee every scene; plan charging and unit changes where needed.
- An IR remote is a simpler option, with its receiver enabled and clear line of sight. Confirm kit inclusion; it does not replace the console’s W-DMX link.
- If the required link or runtime cannot be established, propose an agreed fixed look or a suitable alternative system. A DMX cable cannot plug directly into the original WELL Fit to solve radio incompatibility.
The event starts in daylight and ends at night: will uplighting read the same?
The result depends on ambient light and surface. We can plan a restrained early look and a nighttime look, comparing actual timing before finalizing quantity; more units cannot guarantee overcoming every ambient condition.
- Send event times, venue photos and the areas you want to highlight. A sample on the intended surface helps distinguish low contrast from insufficient quantity.
- The proposal includes total battery time, control of changes, charging, transport and positioning. For outdoor use, check the temporary-use conditions and contact and connection protection required by the manufacturer for the actual fixtures and accessories.
- If daytime visibility is essential, we can assess another lighting or scenic solution and retain WELL Fit where its accents work. We can offer an option for each time of day, supported by a sample on the intended surface.
Quick reference
| Personality | Channels | Last start |
|---|---|---|
| HSI / HSV | 3 | 510 |
| 4Ch RGBA | 4 | 509 |
| 6Ch | 6 | 507 |
| 10Ch | 10 | 503 |
Precautions
- Temporary use: protect contacts and connections, acclimate after condensation and allow ventilation. The housing may become hot.
- Suspension requires a clamp and secondary retention. Confirm the exact retention point with the manufacturer for the actual unit; a Kensington fitting does not establish structural suitability.
- Store at approximately 50% charge in a dry place and periodically check self-discharge as instructed. Do not apply other models’ battery procedures.
Terms on this page
- DMX
- A data protocol controlling lighting functions; each model defines what its channels mean.
- Patch
- Assignment of fixture, profile, address and universe in the control system.
- Personality
- A control mode defining the channels and functions used by a fixture.
Help configuring this equipment
- WELL Fit User Manual — Rev. 7 (PDF) — chauvetprofessional.com
Start with the model instructions and match the edition to the unit you will use.
- WELL Fit DMX Chart — Rev. 1 (PDF) — chauvetprofessional.com
Compare the full personality and function order with the console profile.
- GDTF: profile author, revision and modes — gdtf-development.com
This link explains how to read GDTF profile information; it does not download a WELL Fit profile. Check the author, revision and modes. The Manufacturer tag identifies a revision uploaded by the manufacturer; compare functions with the fixture manual before using the profile.
Documentation and sources
- WELL Fit — original product — chauvetprofessional.com
Consulted: 2026-10-22. Manual Rev.7 and official chart Rev.1; original WELL Fit scope. Configuration and charger depend on actual revision; proposed checks without physical GLMedia testing.
Guides to plan your system
Help us improve this guide
Is an explanation missing, did you find an error, or did you solve something differently? Tell us on WhatsApp.
WhatsApp opens with an editable draft. Review it and send it if you choose. Do not include passwords, keys or client information. Contributions are reviewed before being added to guides; they are not published automatically.