Get a quoteFind a model and open its manual, data sheet or catalog. Read the PDF here or download the original file.
Each document has its own edition, language and conditions. Identify your equipment model and version before applying its instructions.
Search covers titles, descriptions and associated models.
415 documents found
No matches found. Try the model name or a shorter keyword. Ask about documentation
Pages 4–5 identify PL2.5 Pro V10, revision V20221215 and 1/20 scan. They retain two tables with different weights; check the unit and its documentation.
Equipment help: Absen PL2.5 Pro 1/20: V10, V2, NovaStar and Brompton
Pages 2–3 cover PL2.5 Pro V2 with Brompton or NovaStar, revision V20241206. The XR section is separate; do not apply these data to V10.
Equipment help: Absen PL2.5 Pro 1/20: V10, V2, NovaStar and Brompton
Overview of the family’s cabinets and variants. Its table distinguishes PL Pro, indoor/outdoor models and Cube; features and mounting are not shared by all models.
Equipment help: Absen PL2.5 Pro 1/20: V10, V2, NovaStar and Brompton
Covers several families; see the Polaris PL section on page 2. This overview does not replace the identified revision’s manual or specifications.
Equipment help: Absen PL2.5 Pro 1/20: V10, V2, NovaStar and Brompton
Comparison of heads and kits in the family, including 1018A and 1018C variants. Use the correct kit table: leg material, weight, heights and spreader vary. Photos may include optional accessories.
Equipment help: Sachtler Ace XL 75 mm — 1018MS
Safety for the head and tripod assembly, publication S2150-4985/4. Hold the camera during adjustments and remove it before transport. Observe both components’ payload limits and keep feet and added weight off the spreader.
Equipment help: Sachtler Ace XL 75 mm — 1018MS
Mounting, balancing, brake and drag instructions for the S2150-0004 head, publication S2150-4991/3. Identify the head, tripod and spreader in the supplied kit; another Ace XL revision does not share every specification.
Equipment help: Sachtler Ace XL 75 mm — 1018MS
Official STROBE 3 IP overview with features and dimensions. Compare the variant and revision with the manual before applying data.
Equipment help: ACME Pixel Line IP
Controls, connections, modes, menus and safety restrictions for this revision. Check the unit’s mounting variant and firmware.
Equipment help: ACME Pixel Line IP
Chart marked valid from firmware V1.3. Check mode, version and patch; it does not assume an update or replace the manual.
Equipment help: ACME Tornado TB 5 IP
Revision G manual, including connector identification, menus, mounting and control tables. Read the system restrictions before making changes.
Equipment help: ACME Tornado TB 5 IP
Initial WMX1 MK2 setup and operation. Check firmware, fixture personalities and enabled options before using a project in a show.
Equipment help: ADJ WMX1 Mk2
Official Spanish edition of the MK2 quick start guide. The manufacturer’s original PDF is preserved.
Equipment help: ADJ WMX1 Mk2
Official Spanish manual covering groups, effects, projects and sequences. It does not cover MK3; check the unit’s version.
Equipment help: ADJ WMX1 Mk2
System manual covering ADTD/ADTQ transmitters and the ADXR receiver. Use the component’s chapter and check firmware, mode, license and region; ShowLink carries control, while the monitor program follows its audio and RF path.
Equipment help: Shure ADTD · Shure ADXR
System manual covering ADTD/ADTQ transmitters and the ADXR receiver. Use the component’s chapter and check firmware, mode, license and region; ShowLink carries control, while the monitor program follows its audio and RF path.
System manual covering ADTD/ADTQ transmitters and the ADXR receiver. Use the component’s chapter and check firmware, mode, license and region; ShowLink carries control, while the monitor program follows its audio and RF path.
System manual covering ADTD/ADTQ transmitters and the ADXR receiver. Use the component’s chapter and check firmware, mode, license and region; ShowLink carries control, while the monitor program follows its audio and RF path.
Product sheet for the two-radio transmitter. Some features were planned in that edition; check manual 2.2 and firmware notes for modes, expansion and RF power available with the actual license and region.
Equipment help: Shure ADTD
Product sheet for the monitoring bodypack receiver. Describes diversity, ShowLink and CueMode; check the manual and installed-version notes for selecting and applying the mix before handing over the receiver.
Equipment help: Shure ADXR
Matrix by signal source: Wi-Fi, Ethernet or DMX. Use the correct row and model; for wired AKS Plus DMX output, also check the firmware and adapter documented in the manual.
Equipment help: RatPac AKS Plus: Wi‑Fi connection and control checks
Comparison of the two models’ connections, configuration methods and features. Use the AKS Plus column; printed prices are from 2022 and current terms are confirmed in the proposal.
Equipment help: RatPac AKS Plus: Wi‑Fi connection and control checks
Equipment help: RatPac AKS Plus: Wi‑Fi connection and control checks
Equipment help: RatPac AKS Plus: Wi‑Fi connection and control checks
Components, side frames and supports, including AT4PRD industrial panels and other surfaces identified by part number. A weather-resistant panel is not waterproof, and the manual does not establish ground capacity.
Equipment help: IntelliStage All-Terrain: ground, supports and finish
RS4 is covered on PDF pages 16–17. Other sections cover other models; cards, licenses and functions depend on the system configuration and version.
Equipment help: Aquilon RS4: screens, resources, EDID and multiview
Historical 2023 catalog. Z-350 is in the right-hand column of PDF page 23 (printed page 18), alongside Z-390. Use the Z-350 data for the relevant electrical version; the catalog does not replace its manual.
Equipment help: Antari Z‑350: conference haze and irregular output
Transceiver sheet including cables and antennas. Mode functions and radio performance depend on the system and environment.
Equipment help: Aputure Sidus One
Sidus One connections, receive/transmit modes, protocols and setup. Check the app, firmware, universe and linked equipment before changing a network in use.
Equipment help: Aputure Sidus One
Shared document marked Controller Firmware V1.0. Apply the section, personality and settings for the 80c and installed version.
Equipment help: Aputure STORM 80c: interviews and modifier changes
Description, specifications, photometric conditions and reflector kit. Compare results using the relevant accessory and measurement conditions.
Equipment help: Aputure STORM 1200x
Tables for this edition’s profiles 1–32. Match the personality, channel footprint and actual version; downloading does not change the unit’s configuration.
Equipment help: Aputure STORM 1200x
Identifies the lamp head, control box, connections, setup and menus. Confirm power, accessories and unit version before rigging or programming.
Equipment help: Aputure STORM 1200x
80c sheet covering Mini ProLock accessories, adapters and power options. Each accessory retains its own function and operating conditions.
Equipment help: Aputure STORM 80c: interviews and modifier changes
80c manual covering controls, settings, power and safety. Check its Mini ProLock mount and limits against the actual system’s accessories.
Equipment help: Aputure STORM 80c: interviews and modifier changes
Official lamphead and power supply comparison. This help page uses the S60-C column, separate from S60-RP, S30, S120 and S360-C. Each row’s conditions are part of the specification.
Equipment help: ARRI SkyPanel S60-C: interviews, panels and versions
Orbiter system overview, interchangeable optics and control options. Each optic and accessory has its own function and compatibility; the brochure does not replace setup and operating instructions.
Equipment help: ARRI Orbiter
S60-C dimensions, connections, photometry and mounting variants. Weights distinguish the lamphead, manual assembly and pole-operated version; check the unit variant and accessories.
Equipment help: ARRI SkyPanel S60-C: interviews, panels and versions
General guidance on transporting, rigging, powering and operating ARRI lampheads. Use it alongside the model’s manual, accessory requirements and the conditions at the site.
Equipment help: ARRI Orbiter · ARRI SkyPanel S60-C: interviews, panels and versions
Shared chart listing AX3/AX3-BTB, AX5/AX5-BTB and LunaBulb FP7 among other models. Choose a profile compatible with the unit’s color engine, firmware and mode; the full list does not imply that every profile is supported.
Equipment help: Astera AX3 LightDrop · Astera AX5 TriplePAR · Astera LunaBulb
USB and USB-C adapter datasheet. It does not establish a direct link between AVIO USB-C and the Hub: both require a suitable USB host.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
English technical reference for the original AX3 LightDrop, covering controls, diffusers and DMX settings. The internal date is 2023-03-22, although the URL ends in V2; check the variant and firmware.
Equipment help: Astera AX3 LightDrop
Data sheet comparing AX3-CRMX and AX3-BTB. Use the column matching the actual order code: BluetoothBridge and protocols differ between variants. This document covers the original LightDrop, separate from AX3 Neo.
Equipment help: Astera AX3 LightDrop
Official AX3-CRMX manual covering identification, controls, charging and mounting. Includes English, Spanish and French; Portuguese is not included. Check the unit’s order code before use.
Equipment help: Astera AX3 LightDrop
English reference covering AX5 mounting, connections, menus and DMX settings. The internal revision is dated 2020-08-26; V1 in the filename does not identify the installed firmware.
Equipment help: Astera AX5 TriplePAR
Data sheet with AX5 and AX5-BTB columns, dimensions and accessories. Identify the variant before applying BluetoothBridge or protocol data; each row’s conditions are part of the specification.
Equipment help: Astera AX5 TriplePAR
Manual for order code AX5, covering the panel, connections, charging and removable bracket. The issue date is printed as 08/11/2022. Includes English, Spanish and French; check the code before applying instructions to a BTB unit.
Equipment help: Astera AX5 TriplePAR
Instructions for the ST8100 steel Multi-Stage system. Identify deck, support and configuration before applying them; the document does not validate ground conditions or permit mixing other brands’ systems.
Equipment help: Stage on grass: ground, supports and level
Equipment help: Canon CR-N700: outputs, audio, and PTZ control
Official English table for the illustrated cantilever arrangement. Its characteristic loads and support conditions cannot be transferred to another geometry; the responsible professional must check the assembly and local loads.
Equipment help: Eurotruss FD34-050 — 0.5 m truss · Eurotruss FD34-075 — 0.75 m truss · Eurotruss FD34-100 — 1 m truss · Eurotruss FD34-200 — 2 m truss · Eurotruss FD34: identify sections, CS1 parts and load charts
Specific permanent-installation document. Retained as a reference for that use; it does not describe temporary installation for a show.
Equipment help: Harlequin Cascade: performance, marks and cleaning
Cascade data sheet for selection and inquiries. Vinyl surface and substructure serve different functions; the sheet does not certify a complete temporary stage.
Equipment help: Harlequin Cascade: performance, marks and cleaning
Equipment help: Studio Technologies Model 370A: Dante intercom
Equipment help: City Theatrical Multiverse SHoW Baby
Component catalog with part references and specific conditions. Match body, pin and exact accessory documentation; a catalog capacity does not establish the condition of a used part.
Equipment help: Suspended lighting grid: points, loads and lifting plan
Manufacturer reference guide. Does not replace identification, inspection and selection of each accessory or the approved lifting design; capacities do not transfer to unidentified parts.
Equipment help: Suspended lighting grid: points, loads and lifting plan
Installation, operation and maintenance manual cited in the guide. Retain its restrictions concerning people and suspended loads; confirm applicability to the unit’s nameplate and configuration.
Equipment help: Suspended lighting grid: points, loads and lifting plan
Equipment help: NovaStar MX40 Pro: VMP, capacity and LED setup
Family overview with a Stardust section. Use that section to compare features and connectivity; refer to the manual for source configuration and procedures.
Equipment help: LumenRadio Stardust
High Pressure product overview and specifications. Electrical figures distinguish voltage variants; check the rating plate. Fog behavior also depends on the venue and the rehearsed scene.
Equipment help: Cryo‑Fog High Pressure: low fog and effect duration
Manual for the high-pressure siphon-bottle variant. Covers supply requirements, fluid, control and safety; the installation must match the identified system.
Equipment help: Cryo‑Fog High Pressure: low fog and effect duration
Equipment help: NovaStar CVT4K: optical link and missing LED output
Equipment help: NovaStar CVT4K: optical link and missing LED output
Guide for evaluating the computer-based bridge described here. Version 2.7 identifies the document, not installed software; check license, operating system and both audio directions.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Official English document. This help page covers the standard console: verify the model and version before applying AV features or connections.
Equipment help: ETC ColorSource 20
Official English document for original ColorSource Spot and Deep Blue. Use the unit’s variant and CPU version; this does not cover Spot V or Spot jr.
Equipment help: ETC ColorSource Spot Deep Blue
Official English hardware data sheet. Capacity options do not establish the unit’s license: check the model, enabled outputs and proposed accessories.
Equipment help: ETC Element 2: panel cues and changes that do not appear
Official English hardware data sheet. Capacity options do not establish the unit’s license: check the model, enabled outputs and proposed accessories.
Equipment help: ETC Gio @5
Official English hardware data sheet. Capacity options do not establish the unit’s license: check the model, enabled outputs and proposed accessories.
Equipment help: ETC Ion Xe 2K
Official English FD34 series data sheet. Confirm the section code, connections and supports; a series table does not replace review of the actual configuration.
Equipment help: Eurotruss FD34-050 — 0.5 m truss · Eurotruss FD34-075 — 0.75 m truss · Eurotruss FD34-100 — 1 m truss · Eurotruss FD34-200 — 2 m truss · Eurotruss FD34: identify sections, CS1 parts and load charts
Official English document for Source Four LED Series 2. Identify the Lustr variant, software and optics; do not transfer modes or accessories from the other generation.
Equipment help: ETC Source Four LED Series 2 Lustr
Official English document for Source Four LED Series 3. Identify the Lustr variant, software and optics; do not transfer modes or accessories from the other generation.
Equipment help: ETC Source Four LED Series 3 Lustr X8
Official English document. This page covers new-generation Tour Hog; check the hardware, show-file version and components before applying instructions.
Equipment help: Tour Hog: system preparation and planned maintenance
Equipment help: d&b audiotechnik D80
Equipment help: d&b audiotechnik J8 · d&b audiotechnik J-SUB · d&b audiotechnik J Series
Equipment help: d&b audiotechnik J-SUB · d&b audiotechnik J Series
Equipment help: d&b audiotechnik J8 · d&b audiotechnik J Series
Equipment help: d&b audiotechnik T-SUB
Equipment help: d&b audiotechnik T10
Equipment help: d&b audiotechnik Y12 · d&b audiotechnik Y8
Equipment help: Decimator 12G-CROSS: adapt signals using known formats
Shared Director-family manual, dated 12.04.2025 on its cover. Use Director Mini sections and check the installed version: connections, scenes, audio, streaming and recording depend on model and firmware.
Equipment help: Magewell Director Mini: compact scenes, streaming and recording
Includes Spanish, English, French and Portuguese. Identify the double-ear variant before applying accessory connections or alerts from the single-ear headset.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Equipment help: Studio Technologies Model 370A: Dante intercom
Equipment help: DSAN PerfectCue Micro
Equipment help: PerfectCue Mini: cues, USB and backup control
Equipment help: DSAN PerfectCue
Equipment help: Electro-Voice EKX-12P
Equipment help: Electro-Voice EVERSE 12 · Electro-Voice EVERSE 8
Equipment help: Electro-Voice ZLX-12P-G2
Equipment help: ESER01-03SK — steel sling WLL 1 t, 1.5 m · ESG25L1-02 — buckle strap, 2 m × 25 mm · ESR50Z1-09 — strap 9 m × 50 mm: identification and lashing
Overview of models, controls and options. Illustrated accessories are not all included, and not every variant applies to LP500/1NL.D8+.
Equipment help: GIS LP500/1NL.D8+: prepare the hoist and control inquiry
Equipment help: ENTTEC Open DMX USB
Equipment help: ENTTEC S-PLAY SP1-1
Equipment help: Epiphan Pearl Nexus: streaming, recording and automation
Equipment help: Epson PowerLite L690U: hotel conference projection · Epson PowerLite L790U: signal, AirPlay, and monitor output
Equipment help: Epson EB-PQ2008B: projector body, lens, and system · Epson EB-PQ2010W: projector body, lens, and system
Equipment help: Epson PowerLite 1795F: placement, signal, and readability
Equipment help: Epson PowerLite L690U: hotel conference projection
Equipment help: Epson PowerLite L790U: signal, AirPlay, and monitor output
Studio subwoofer line-level connections, filters, polarity, bypass, placement and calibration. Check power requirements on the rating plate; do not apply this scope to a PA subwoofer.
Equipment help: PreSonus Eris Pro Sub 10
Equipment help: NovaStar MCTRL4K: inputs, port capacity and LED mapping
Equipment help: NovaStar MCTRL4K: inputs, port capacity and LED mapping
Equipment help: NovaStar - VX1000
Family manual with separate chapters for EW-D EM, the SKM-S transmitter, standard EM 2 and EM 4 Dante. Use your model’s chapter; identify band and version before configuring RF, power, audio or networking. Dante variant features do not apply to the standard EM 2.
Equipment help: Sennheiser EW-D 835-S · Sennheiser EW-DX EM 2: variant, power and audio · Sennheiser EW-DX EM 4 Dante
Overview of family sets, receivers and accessories. Distinguish EW-D, standard EM 2, EM 2 Dante and EM 4 Dante in the tables; a control connection does not imply Dante audio. Published figures belong to this edition and do not replace the model manual or RF coordination for the event.
Equipment help: Sennheiser EW-D 835-S · Sennheiser EW-DX EM 2: variant, power and audio · Sennheiser EW-DX EM 4 Dante
Covers the 1.5 m SQ-4111 example used in this guide. Does not identify every F34 length or establish load capacity or compatibility with another manufacturer.
Equipment help: Global Truss F34: parts, chart criteria and rigging limits
Global Truss GmbH F44 data sheet: geometry, components and family references. F44P and DT44P are outside its scope; it does not approve an assembled structure.
Equipment help: Global Truss F44: regional identity and unidentified material
Equipment help: StageDex TopLine: repeated use and rental receiving
Equipment help: NovaStar VX16S: black screen, scaling and LED mapping
Equipment help: Ultratec G3000: fog preparation and control diagnosis
Equipment help: Ultratec G3000: fog preparation and control diagnosis
Sheet for the 4 GB/64 GB 5G variant, with display and storage details for the U.S. market. It does not identify the tablet supplied for your event or describe the Wi-Fi variant. Android 13 and connectivity details belong to this 2024 sheet; check the model code and installed version.
Equipment help: Samsung Galaxy Tab A9+
Check the section for the identified fabric before washing or ironing. Covers Commando and several velour variants; it does not identify or certify the supplied panels.
Equipment help: Georgia Expo black commando — 16 ft · Georgia Expo skirting and additional colors · Georgia Expo black velour — 18 ft
Example audio, lighting and intercom distribution. Use it to plan groups and links; define devices, traffic and redundancy for the actual project.
Equipment help: Luminex GigaCore 10t: planning a lighting network
Range ports, power, dimensions and variants. Fiber and PoE options depend on the product code; check the unit before planning modules or powered loads.
Equipment help: Luminex GigaCore 10t: planning a lighting network
Guide for the GigaCore 10t range. Identify product code, generation and connections before applying installation or network steps; GigaCore 10 and 10t-IP have their own documentation.
Equipment help: Luminex GigaCore 10t: planning a lighting network
Hardware safety, transport, startup and technical data. Includes compact XT, full-size and light; use your console’s section. Use the help for the installed software version when programming the show.
Equipment help: grandMA3 compact XT: conference preparation and network output · MA Lighting grandMA3 full-size · MA Lighting grandMA3 light
Table by article and grandMA3/Mode2 operation. Identify the product number before comparing capacity: parameters, network universes and DMX connectors are separate planning items.
Equipment help: grandMA3 compact XT: conference preparation and network output · MA Lighting grandMA3 full-size · MA Lighting grandMA3 light
Equipment help: NovaStar H5: HDMI/DP cards, optical outputs and power supplies · NovaStar H5: LED mapping, layers and configuration backup
Equipment help: NovaStar H2: cards, web control, preview and fiber checks
Equipment help: NovaStar H9: capacity, cards, layers and input backup · NovaStar H5: HDMI/DP cards, optical outputs and power supplies · NovaStar H5: LED mapping, layers and configuration backup
Equipment help: NovaStar H2: cards, web control, preview and fiber checks
Equipment help: NovaStar H2: cards, web control, preview and fiber checks
Equipment help: Prolyte H30D: orientation, connections and structure proposal
Equipment help: Prolyte H30D: orientation, connections and structure proposal
Equipment help: Prolyte H30D: orientation, connections and structure proposal
Equipment help: Prolyte H40R: prepare loads, orientation and components
Equipment help: Prolyte H40R: prepare loads, orientation and components
Equipment help: Prolyte H40R: prepare loads, orientation and components
Equipment help: NovaStar H5: HDMI/DP cards, optical outputs and power supplies · NovaStar H5: LED mapping, layers and configuration backup
Equipment help: NovaStar H9: capacity, cards, layers and input backup
June 2024 edition covering Cascade and excluding printed vinyl. Identify product, finish and condition before selecting cleaning; do not transfer the procedure to another material.
Equipment help: Harlequin Cascade: performance, marks and cleaning
Portable Liberty installation is on pages 12–13; the same PDF covers other systems and methods. Identify panels, locks and subfloor before selecting the applicable section.
Equipment help: Harlequin Liberty: modular dance floor on a temporary stage
Performance vinyl instructions. Select the applicable temporary method and check the subfloor; distinguish them from permanent Cascade installation.
Equipment help: Harlequin Cascade: performance, marks and cleaning
Manual for the version used in this guide. It covers several consoles: use the original Road Hog 4 hardware section for this model and check the installed software; Road Hog 4-21 has a separate hardware section.
Equipment help: High End Systems Road Hog 4
Connections, menus, power and the HDMI/SDI format table. This is an early edition: check TX/RX configuration and firmware against the Pyro S release notes retained on this page.
Equipment help: Hollyland Pyro S · Sony PXW-Z150
Equipment help: HyperDeck Studio 4K Pro: input, codec, and recording · HyperDeck Studio HD Plus: input, codec, and recording
Installation, connections, control and maintenance for the WB and FS variants. Identify the fixture version before applying a procedure: the camera marked as FS does not apply to WB. Overhead installation requires competent personnel and the manual’s safety measures.
Equipment help: Robe iFORTE LTX
Official English document for original ColorSource Spot and Deep Blue. Use the unit’s variant and CPU version; this does not cover Spot V or Spot jr.
Equipment help: ETC ColorSource Spot Deep Blue
Manufacturer note on the photobiological classification error in earlier documentation. Read with the revised manual and its conditions; exposure precautions still apply.
Equipment help: GLP JDC1
Map for software 178-69-19. Check mode and common channels before programming pixels; do not import another JDC’s personality.
Equipment help: GLP JDC1
Bulletin on the central white LED change. A matching model name does not identify a fixture’s revision or service history.
Equipment help: GLP JDC1
For the original JDC1 with software 178-69-19. Includes the August 2024 photobiological classification correction; does not cover JDC2 IP.
Equipment help: GLP JDC1
JDC2 IP overview for selection and project planning. Installation, environment, power and control require the applicable manuals and actual configuration.
Equipment help: GLP JDC2 IP
The cover identifies firmware 0.6.1. Review applicable physical and connection conditions; use the dedicated V2.0.1 documents for control.
Equipment help: GLP JDC2 IP
Rev20260504-1: canvas, positioning and effect sources for this version. Available functions depend on the personality and actual network system.
Equipment help: GLP JDC2 IP
Rev20260504-1 for V2.0.1. Preserve the selected mode’s functions and footprint when checking a library; back up a show before changing its patch.
Equipment help: GLP JDC2 IP
V2.0.1 canvas arrangement and DMX layout. Match firmware, personality and show; this is not the JDC1 manual or the original system version.
Equipment help: GLP JDC2 IP
Safety, power, rigging, menus and control for LEDBeam 150 and 150Q. The fixture is intended for indoor use; this manual does not cover the FW/FWQ variants listed in the linked DMX chart. Match the DMX mode on the console and fixture.
Equipment help: Robe LEDBeam 150
Shared manual for LEDBeam 350, 350 FW, 350 EP and 350 FW EP: installation, connections, menus and maintenance. Identify the variant and use its channel table; a shared manual does not make fixture profiles interchangeable. Indoor use as specified by the manufacturer.
Equipment help: Robe LEDBeam 350: panel, runway and color tests
Equipment help: Robe LEDBeam 150
Equipment help: Robe LEDBeam 150
Guide for the Liberty panel system. Confirm variant, layout, edges and supporting floor; it is not interchangeable with Liberty HD, Liberty Switch or a structural stage deck.
Equipment help: Harlequin Liberty: modular dance floor on a temporary stage
Distinguishes listen-only, reply-to-leader and group talkback, with leader, subleader and participant roles. Select the mode and check who hears a question before handing out units.
Equipment help: ListenTALK LK-1: groups and questions on tours
System roles, group setup, controls and charging. Identify the LK-1 regional variant and accessories; LKR receivers do not gain talkback capability by joining the group.
Equipment help: ListenTALK LK-1: groups and questions on tours
Spanish edition to use with the system’s regional model. Describes use and configuration; it does not provide automatic translation or guarantee coverage along a route.
Equipment help: ListenTALK LK-1: groups and questions on tours
Includes LP500/1NL D8 PLUS, installation, maintenance and classification-specific tables. Match the edition, nameplate and configuration; it does not approve a real lifting operation.
Equipment help: GIS LP500/1NL.D8+: prepare the hoist and control inquiry
English family data sheet. Retain the conditions of the LP500/1NL.D8+ row and check the actual unit’s supply, chain and control.
Equipment help: GIS LP500/1NL.D8+: prepare the hoist and control inquiry
Separates D8, D8 Plus and C1, with variant-specific tables and conditions. Use the exact row and units; a different safety-factor column or edition does not override the nameplate.
Equipment help: GIS LP500/1NL.D8+: prepare the hoist and control inquiry
Visual identification of connections and controls on both devices. The RJ45 expansion link is dedicated; its connector shape does not make it an Ethernet switch connection.
Equipment help: Listen Technologies LT-84
Inputs, carriers, installation and coverage with identified receivers. LT-84 carries two audio feeds; LA-141 expands infrared distribution as designed without creating new language feeds.
Equipment help: Listen Technologies LT-84
Design using one LT-84 per section, compatible receivers and an external audio matrix. Four selectable carriers do not give one unit four simultaneous audio feeds.
Equipment help: Listen Technologies LT-84
Example paths between controller, network and destinations. Check ports, power and functions against the node’s manual and firmware before using the diagram for a show.
Equipment help: LumiNode 4: distribution and source control policy
Edition marked 20220629-REV 2.4.1. Check DMX ports, process engines and processing modes against installed firmware; a processing engine and a connector are different resources.
Equipment help: LumiNode 4: distribution and source control policy
Data sheet with printed version 3.0, E26/E27/B22 bases and output data with the dome fitted. Voltage depends on the variant and IP44 depends on the socket. The internal file title says V3.2; the printed revision is retained.
Equipment help: Astera LunaBulb
Manual for FP7-E26, FP7-E27 and FP7-B22, covering base identification, control and the removable dome. Includes English, Spanish and French, without Portuguese. Check the unit’s base, voltage and operating conditions.
Equipment help: Astera LunaBulb
Equipment help: NovaStar - VX1000
Equipment help: NovaStar MCTRL4K: inputs, port capacity and LED mapping
Equipment help: NovaStar VX16S: black screen, scaling and LED mapping
Equipment help: NovaStar MCTRL660: signal, EDID and LED setup
Equipment help: NovaStar MCTRL660: signal, EDID and LED setup
Equipment help: NovaStar MCTRL660: signal, EDID and LED setup
MoonLite² features and connections, including transmit/receive distinctions. Identify the app, charging arrangement and receivers before planning the control path.
Equipment help: LumenRadio MoonLite²
MoonLite² charging, TX/RX, linking and controls. Confirm the SKU and protocol at each end; check receive and transmit capabilities separately.
Equipment help: LumenRadio MoonLite²
Shared manual covering Prostage and D8, D8 Plus and C1 sections. Apply the D8 Plus and identified-unit scope; sharing a document does not make another category’s conditions applicable.
Equipment help: Moveket PROstage 500: separate identity, suspension and movement
Equipment help: NovaStar MX20: COEX, receiving cards, and LED configuration
Equipment help: NovaStar MX20: COEX, receiving cards, and LED configuration
Equipment help: NovaStar MX40 Pro: VMP, capacity and LED setup
Equipment help: NovaStar MX40 Pro: VMP, capacity and LED setup
Original-series instructions, without breaking capacity. Do not connect or disconnect under load or live; do not assign XX-series conditions to NAC3FCA.
Equipment help: powerCON and TRUE1: the part number defines conditions
Equipment help: nivtec Standard 200 × 100 cm: from stage sketch to proposal
Instructions for the 200 × 100 cm grid: planning, supports, connections, access and rails. Use them with the setup schemes and bracing rules applicable to the exact assembly.
Equipment help: nivtec Standard 200 × 100 cm: from stage sketch to proposal
Equipment help: nivtec Standard 200 × 100 cm: from stage sketch to proposal
Stairway, show-stairway and ramp schemes for stage heights up to 140 cm. X0501.042 on page 2 lists the 200 × 100 cm platform, reference 111 01 0, within that specific assembly.
Equipment help: nivtec Standard 200 × 100 cm: from stage sketch to proposal
Equipment help: NovaStar NovaPro UHD: preview, 4K inputs and image recovery
Equipment help: NovaStar NovaPro UHD Jr: input and LED canvas
Equipment help: NovaStar NovaPro UHD Jr: input and LED canvas
Equipment help: NovaStar NovaPro UHD: preview, 4K inputs and image recovery
Official checklist for shelter, monitoring and communications. Contains examples and fields to define; it does not replace the event plan or installed system limits.
Equipment help: Outdoor stage roofs: configuration and weather plan
Official English manual, PN32950, first edition, seventh printing. Confirm that it applies to the ST-25 serial number, accessories and configuration before using its procedures or tables.
Equipment help: Genie ST-25: attachment, load and offset load center
Original-model technical overview for inquiries and project planning. Does not assign JDC2 IP outdoor protection or network features to JDC1.
Equipment help: GLP JDC1
Eight-port rack gateway manual for firmware 6.1 or later. Covers connector variants, local and Pathscape configuration, domains, patch, priorities and signal loss; check system versions.
Equipment help: Pathport OCTO: variant, distribution and an unresponsive port
Includes NAC3FXXA-W-L. Identify the complete connector pair, cable variant and conditions; blue color does not establish breaking capacity or regional equivalence.
Equipment help: powerCON and TRUE1: the part number defines conditions
Official English HD/FD34 tower leaflet. Identify the base, hinges, sleeve block, top section and hoist, then have the assembly reviewed. Do not use horizontal-beam tables as tower load ratings.
Equipment help: Eurotruss HD/FD34 Tower: base, head and sleeve identification · Totems and projection towers: identify the whole assembly
Official English 2020 data sheet for ST-20 and ST-25. Use the ST-25 column and verify the unit, attachment and load-center documentation; the leaflet does not establish inspection.
Equipment help: Genie ST-25: attachment, load and offset load center
V3.0 retained as the reference for the procedure cited in the guide. Its weight and load figures differ from V4.0: do not combine tables or use the higher figure to approve an assembly. The cover is on PDF page 2; the first page is blank.
Equipment help: ProFlex Feather-Lite: presentation and transport planning
Edition marked V4.0, 08.10.26, including FL4X4I with integrated folding legs. Check this edition’s weight and load information for the actual part, together with connections, protections and assembly conditions. The cover is on PDF page 2; the first page is blank.
Equipment help: ProFlex Feather-Lite: presentation and transport planning
ProFlex document covering the square-leg configuration described here. It distinguishes adapters, clamps and leveling inserts; identify generation, height and bracing before applying its diagrams to a system.
Equipment help: ProFlex Heavy-Duty: height, legs and bracing
Data sheet for the system cited as an example. Separates configurations and conditions; it is not the full manual and does not set wind, ballast or load limits for another roof.
Equipment help: Outdoor stage roofs: configuration and weather plan
Equipment help: Prolyte Verto H30V: system receipt and connection identity
Manufacturer’s basic and safety guide. For operation, adjustments and networking, also use the full functional manual in English, Spanish or French.
Shared with PT-REQ10 and PT-REQ80. Check the PT-REQ12/REQ12L variant and lens code; installation, signals, adjustments and networking must match the unit’s firmware.
Equipment help: Panasonic PT-REQ12: body, lens, and projection position
Shared with PT-REQ10 and PT-REQ80. Check the PT-REQ12/REQ12L variant and lens code; installation, signals, adjustments and networking must match the unit’s firmware.
Shared with PT-REQ10 and PT-REQ80. Check the PT-REQ12/REQ12L variant and lens code; installation, signals, adjustments and networking must match the unit’s firmware.
Series catalog covering variants with and without a lens, options and performance conditions. Its 2023 release forecasts do not establish current availability.
Equipment help: Panasonic PT-REQ12: body, lens, and projection position
Specification file for PT-REQ12 variants: installation, power, optics, dimensions and signals. Use the exact suffix and lens; series options are not assumed to be installed.
Equipment help: Panasonic PT-REQ12: body, lens, and projection position
Official English document for Source Four LED Series 2. Identify the Lustr variant, software and optics; do not transfer modes or accessories from the other generation.
Equipment help: ETC Source Four LED Series 2 Lustr
Includes imperial QLP4I and QL4TL1. Identify the deck, legs, inserts and locks for the actual system. The cover is on PDF page 2; the first page is blank.
Equipment help: IntelliStage QuickLock: program changes and even joints
Official English document. This help page covers the standard console: verify the model and version before applying AV features or connections.
Equipment help: ETC ColorSource 20
Official English release notes for patch 3.3.10. Use alongside the 3.3.0 manual; this PDF contains no software or firmware.
Equipment help: ETC Element 2: panel cues and changes that do not appear · ETC Gio @5 · ETC Ion Xe 2K · ETCnomad: from computer to verified output
Official English document. This page covers new-generation Tour Hog; check the hardware, show-file version and components before applying instructions.
Equipment help: Tour Hog: system preparation and planned maintenance
Manual for version 3.50 and later: audio mixing, HDMI/SDI sources, outputs, USB and automation. Check the installed version before following menus or features; downloading this document does not require updating the switcher.
Equipment help: Roland V-160HD: sources, USB, and graphics
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Equipment help: Roland V-160HD: sources, USB, and graphics
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Edition 01 retained for the procedure cited in this guide. Match the switcher version against edition 03 for 1.20 and later before applying features that have changed.
Equipment help: Roland V-80HD: room, remote audience, and recording
Edition 03 for version 1.20 and later. Covers routing, SRT, playback, recording and the conditions for simultaneous use. Check format and bitrate in the applicable procedure; do not assume every function can be combined without limits.
Equipment help: Roland V-80HD: room, remote audience, and recording
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Equipment help: Roland V-1HD+: compact conference and missing laptop picture
Manual for version 2.0 and later: audio mixing, video, streaming and control. The echo canceller is assigned to AUDIO IN 1–2; it does not apply to every input. Identify the remote return and check routing before enabling processing.
Equipment help: Roland VR-6HD: hybrid room and duplicated remote speech
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Safety, controls, connections and startup for the named model. When preparing the show, also check routing and restrictions in the reference manual; the startup guide does not cover every function.
Equipment help: Prolyte S36R: identified system and component replacement
Equipment help: Prolyte S36R: identified system and component replacement
Equipment help: Sachtler Ace XL 75 mm — 1018MS
Official multilingual setup guide for the standard console. Check the model before connecting power and DMX.
Equipment help: ETC ColorSource 20
Equipment help: Shure AD4D: conference RF links and mixing · Shure Axient Digital
Equipment help: Shure Axient Digital AD4Q
Manual for the scalable Axient Digital or ULX-D receiver. Distinguish transmission mode, licensed channels and actual band; ANX4 licenses are not interchangeable with Axient Digital PSM licenses. Check the unit’s state before preparing the RF plan.
Equipment help: Shure ANX4
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Receiver features, connections and specifications. Channel count requires licenses and depends on operating mode; check transmitter bands and restrictions before finalizing a configuration.
Equipment help: Shure ANX4
Introduction to the AD/ADX generation and AD4D/AD4Q receivers. This is a 2017 edition: it does not cover the full later range or identify the components, band or channels of the proposed system. Use the actual model’s manual for setup.
Equipment help: Shure Axient Digital
Manual covering square and round MXA920 variants: coverage, networking, audio and installation. Use the procedure for the supplied form factor and check PoE power and audio routing. It does not extend to MXA925.
Equipment help: Shure MXA920
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Shared manual for MXW neXt 2/4/8. For this guide, use the APXD2 and MXW neXt 2 sections; do not transfer APX4/8 or NDX station ports, power requirements or capacities to the two-channel system.
Equipment help: Shure MXW neXt 2
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Earlier manufacturer edition in the named language, useful for comparing procedures. For later functions and changes, also check the current English edition; the document revision alone does not identify the device firmware.
Equipment help: Shure IntelliMix P300: hybrid meeting audio
Manual for the P10T transmitter and P10R+ receiver, covering input level, Stereo/MixMode, balance, V LOCK and panel locking. Confirm model and band on the labels; do not transfer these controls to P10R without checking its documentation.
Manual for the P10T transmitter and P10R+ receiver, covering input level, Stereo/MixMode, balance, V LOCK and panel locking. Confirm model and band on the labels; do not transfer these controls to P10R without checking its documentation.
Manual for the P10T transmitter and P10R+ receiver, covering input level, Stereo/MixMode, balance, V LOCK and panel locking. Confirm model and band on the labels; do not transfer these controls to P10R without checking its documentation.
Equipment help: Shure PSM1000 (P10R+)
Guide specific to the SLXD4Q+ quad receiver and compatible transmitters: synchronization, ShowLink Ease, Audio Summing, DFR and outputs. Distinguish the standard model from SLXD4QDAN+ with Dante; check band, transmitter and firmware before using functions.
Equipment help: Shure SLXD4Q+
Guide specific to the SLXD4Q+ quad receiver and compatible transmitters: synchronization, ShowLink Ease, Audio Summing, DFR and outputs. Distinguish the standard model from SLXD4QDAN+ with Dante; check band, transmitter and firmware before using functions.
Guide specific to the SLXD4Q+ quad receiver and compatible transmitters: synchronization, ShowLink Ease, Audio Summing, DFR and outputs. Distinguish the standard model from SLXD4QDAN+ with Dante; check band, transmitter and firmware before using functions.
Guide specific to the SLXD4Q+ quad receiver and compatible transmitters: synchronization, ShowLink Ease, Audio Summing, DFR and outputs. Distinguish the standard model from SLXD4QDAN+ with Dante; check band, transmitter and firmware before using functions.
Single- and dual-height variants, decks, storage dimensions and weights by reference. An open size of 8 × 6 ft does not identify a unit’s height or all its features; check its label and configuration before planning transport and setup.
Equipment help: SICO 1800 Series: a stage for talks, panels and awards
Handling, unfolding, height, folding, interlocking and maintenance instructions, with a parts list. Trained personnel and interlock hooks are required; wheels do not authorize moving an occupied stage. Use the reference and serial number to check parts.
Equipment help: SICO 1800 Series: a stage for talks, panels and awards
Equipment help: SICO Cam-Lam: a dance floor for a gala or room changeover
Equipment help: SICO Cam-Lam: a dance floor for a gala or room changeover · SICO Starlight II: plan an outdoor dance floor
Manual for the Series 3 ramp system, including sections, landings, turns, handrails and connections. It does not establish compatibility of a generic ramp or incomplete set with the proposed stage. Check parts, route, connection and venue requirements before setup.
Equipment help: SICO 1800 Series: a stage for talks, panels and awards
Starlight document linked by SICO for Starlight II. Check it against the panels’ reference and serial number. It prohibits use when wet, without trim or with the stated gaps and damage; temporary outdoor use still requires checks of the base, heat and operating conditions.
Equipment help: SICO Starlight II: plan an outdoor dance floor
Controls, indicators, TALK/MUTE and PTT for this variant. Button B requires a hub; hearing sidetone does not confirm reception from another position.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Illustrates webbing, hook and loop options for table, stage and AV skirts. Match the actual skirt backing and attachment; the options are not all supplied together.
Equipment help: Georgia Expo skirting and additional colors
Groups, PGM, 4 Wire and UAC for this base. The official filename says V3.0, while the cover says V2.0. It does not cover Roaming Hub.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Spanish Hub edition; the V3.0 filename and V2.0 cover differ. Confirm model and version before changing the audio matrix.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
English edition of the headset-only manual. Check indicators, assigned units and the kit’s region before pairing.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Master, remotes and pairing for the headset-only system, covering single-ear and double-ear variants. It does not describe routing inside a Hub base.
Equipment help: Solidcom C1 Pro: connection, groups, Zoom and Dante
Complete configuration and operation guide: connections, power, zoom, tracking and remote control. PoE++ limits recording functions and pan/tilt acceleration; check those sections and the installed revision before planning the system.
Equipment help: Sony BRC-AM7: zoom, control, and tracking
Shared guide for the FR7 body and FR7K kit. Identify the lens and accessories: a compatible mount does not establish remote zoom or supported PTZ movement. Check power and the restriction on recording with auto framing when using PoE++.
Equipment help: Sony FR7: lens, control, and auto framing
Guide to connections, installation, optics, settings, maintenance and troubleshooting. Use the PHZ61 column and values: a shared manual does not make PHZ51 performance identical. Distinguish native resolution from supported input signals and check location, ventilation and screen before setup.
Equipment help: Sony VPL-PHZ61: conferences and screen lighting
Equipment help: NovaStar MX20: COEX, receiving cards, and LED configuration
Equipment help: NovaStar MCTRL660: signal, EDID and LED setup
Licenses, components, startup, Mic/Line and IEM, networking and troubleshooting. Check RF zone and version: pairable devices, RF links and Base Station inputs/outputs are different limits. Maximum figures conditional on future functions are not assumed available on the actual system.
Equipment help: Sennheiser Spectera
Network planning and configuration: addressing, infrastructure, services and ports. Review control and audio paths with the network administrator; device discovery does not confirm audio subscriptions or synchronization.
Equipment help: Sennheiser Spectera
Manufacturer guidance for planning access controls and system protection. Apply the sections relevant to the version and installation, with network responsibilities agreed before the show.
Equipment help: Sennheiser Spectera
Earlier shared sheet with size, height and surface options. FR-2403 and FR-2404 differ in finish; check the exact code and applicable instructions. This sheet does not establish the finish, height or accessories of the proposed unit.
Equipment help: StageRight FR-2403: folding, height selection and positive locks
Packet for FR-2402/FR-2403/FR-2404. For this help page, identify the FR-2403 reference in the table: folding, changing height and reversing the deck surface are different operations. Dual-height adjustment is documented in transport/storage position; check every fastener before use.
Equipment help: StageRight FR-2403: folding, height selection and positive locks
AS manual for level environments: identification, locators, height selection, leveling and bridging. Check locator pins and procedures against AS; do not replace them with the AT sequence or remove supports without the documented layout.
Equipment help: StageRight ME-1000: AS, AT and bridging-deck checks
Manual for the AT variant with its locators and layout. All Terrain does not establish suitability of any ground or outdoor use of the assembly. Confirm reference, decks, bearing conditions and actual plan; the AS manual does not replace AT instructions.
Equipment help: StageRight ME-1000: AS, AT and bridging-deck checks
Packet for the ME-3750 rolling support: parts, unfolding, height, locators, casters and stationary support. Complete setup requires at least two people. A procedure that includes decks does not authorize moving people or any additional load; document the proposed assembly and movement.
Equipment help: StageRight ME-3750: rolling support and stage proposal
Packet for the ME-500 support system, covering identification, fasteners, locators, leveling and maintenance. Check reference 319536 in this help page against the actual support; decks and accessories are specified separately. The ME-3750 caster procedure does not apply.
Equipment help: StageRight ME-500: supports, decks and stage delivery checks
Manufacturer guide to selection criteria. This is not an assembly manual or a load calculation for the proposed runway.
Equipment help: Runway: route, deck transitions and surface finish
Basic accessory instructions referring to the StageTek 280A099 manual included here. They do not by themselves define occupied use or permit moving a riser with people on it.
Equipment help: Drum or musician riser: fixed use and scene changes
Assembly with folding legs and PJM joining mechanisms. It distinguishes parts and height pairs; it does not document converting a fixed deck into a rolling riser or moving it with people.
Equipment help: Staging 101: hotel platform and transport options
Two-page data sheet covering surface variants. Page2 distinguishes clear acrylic Plexi from natural polypropylene Milk Plexi; do not assign one configuration’s specifications to every finish.
Equipment help: 8 × 4 ft illuminated platform: Milk Plexi · 8 × 4 ft transparent platform: Clear Plexi · Dance floor on 8 × 4 ft decks: wood finish
Product and accessory manual, including fixed and adjustable stairs. A project drawing and part references are still required; it does not by itself specify a curved or spiral stair.
Equipment help: Curved stage stairs: radius, rise and landing · 12 ft circular stage: footprint and access · 16 ft circular stage: footprint and access · 20 ft circular stage: footprint and access · 24 ft circular stage: footprint and access · 28 ft circular stage: footprint and access · 32 ft circular stage: footprint and access · 4 ft circular stage: footprint and access · 8 ft circular stage: footprint and access · Tiered pyramid stage: concentric circles or stepped squares · 8 × 4 ft illuminated platform: Milk Plexi · 8 × 4 ft transparent platform: Clear Plexi · Dance floor on 8 × 4 ft decks: wood finish
Manual for LDMAUI11G3(W) and LDMAUI28G3(W), with English, Spanish and French sections. Covers assembly, line inputs and MAIN/SUB controls; G3 MIX uses a different manual.
Equipment help: LD Systems MAUI 28 G3
Manual for firmware 1.5.0 or later. Covers Art-Net/sACN inputs, radio outputs and source merging; check installed firmware and the show’s universe map.
Equipment help: LumenRadio Stardust
Equipment help: NovaStar TB40: local content, HDMI input and control connection
Equipment help: NovaStar TB8: HDMI modes, control connection, USB and backup
Equipment help: TOMCAT Medium-Duty Plated: identify the series and load case
Sheet for 12 × 12 in Plated truss, with geometry, references and a simple-span table limited to L/100. Read every note on supports, load points and direction; do not combine maxima or transfer this table to another connection, section or configuration.
Equipment help: TOMCAT 12 × 12 Plated: identification, bolts and load-chart scope
Operation of the cited TRUE1 TOP cable connector. Apply only the identified reference and mating pair’s conditions; do not transfer environmental protection or limits from another family.
Equipment help: powerCON and TRUE1: the part number defines conditions
Connector and chassis system inspection notice. Does not replace inspection of the complete cable; for damage or abnormal operation, follow the competent person’s procedure.
Equipment help: powerCON and TRUE1: the part number defines conditions
Manufacturer-linked instructions for NAC3F-TRUE1-S. Retain the actual mating pair’s limits; do not identify every black connector as this model.
Equipment help: powerCON and TRUE1: the part number defines conditions
Safety notice for the corresponding TRUE1 series. Identify product and condition before use; the document does not certify an assembled or wired cable.
Equipment help: powerCON and TRUE1: the part number defines conditions
Equipment help: Studio Technologies Model 370A: Dante intercom
Equipment help: Studio Technologies Model 370A: Dante intercom
AIO connections, display, web interface, encoding, networking, streaming and recording. Check the unit’s version and each destination’s format before applying the examples to a show.
Equipment help: Magewell Ultra Encode AIO: destinations and missing stream
Unique 2.1 features, controls and published specifications. Use it to plan the effect; choose pump, fan and timer settings for the actual venue and ventilation.
Equipment help: Unique 2.1: continuous atmosphere and changing ventilation
Pump and fan control, specified fluid, care and shutdown. Follow the manufacturer’s sequence and agree haze use with the venue before rehearsal.
Equipment help: Unique 2.1: continuous atmosphere and changing ventilation
Equipment help: NovaStar MCTRL660: signal, EDID and LED setup
Equipment help: NovaStar MX20: COEX, receiving cards, and LED configuration
Official English document. This help page covers the standard console: verify the model and version before applying AV features or connections.
Equipment help: ETC ColorSource 20
Official English manual, version 1.4.0. Covers DFL7 and DFL5; check the intended DFL7 variant, mode and accessories.
Equipment help: ETC Desire Fresnel DFL7: speakers and camera whites
Official English Eos 3.3.0 manual. Covers Element 2, Gio @5 and Ion Xe; use the hardware-specific chapter and the installed patch’s release notes. Features and capacities differ.
Equipment help: ETC Element 2: panel cues and changes that do not appear · ETC Gio @5 · ETC Ion Xe 2K · ETCnomad: from computer to verified output
Official English document. This page covers new-generation Tour Hog; check the hardware, show-file version and components before applying instructions.
Equipment help: Tour Hog: system preparation and planned maintenance
Official English document for Source Four LED Series 3. Identify the Lustr variant, software and optics; do not transfer modes or accessories from the other generation.
Equipment help: ETC Source Four LED Series 3 Lustr X8
Official English document for Source Four LED Series 2. Identify the Lustr variant, software and optics; do not transfer modes or accessories from the other generation.
Equipment help: ETC Source Four LED Series 2 Lustr
Equipment help: NovaStar VX600: canvas, scaling, and LED screen
10-, 12- and 20-channel DMX modes, menus and VenueLink port use. Check the wireless dongle and controller separately.
Equipment help: Venue Revolver Wash VP
Rotating-coupler overview, components and regional-version data. Its tables use the 2015 Aluminum Design Manual; do not combine them with the European manual merely by converting units.
Equipment help: Prolyte Verto H30V: system receipt and connection identity
Equipment help: Teradek VidiU X: conference output and intermittent link
Manufacturer datasheet for the 5,000 ANSI lm version: optics, connections and dimensions. It does not replace the manual or confirm the actual unit’s power adapter.
Equipment help: ViewSonic LS740HD: projection for meetings and events
Viper NT power, consumption, dimensions and control data. Nominal projection is a manufacturer reference; check the effect in the intended scene.
Equipment help: Look Solutions Viper NT
DMX and analog remote connections, timer, fluids and precautions. Identify the voltage version and retain the manual’s clearance requirements when positioning the machine.
Equipment help: Look Solutions Viper NT
Equipment help: NovaStar TB40: local content, HDMI input and control connection · NovaStar TB8: HDMI modes, control connection, USB and backup
Visual fabric reference covering Commando and several velour types. Identify the panel fabric before comparing; this is not an acoustic measurement or a fire-test certificate.
Equipment help: Georgia Expo black commando — 16 ft · Georgia Expo black velour — 18 ft
Equipment help: NovaStar VX4S: control connection, monitoring and input backup
Equipment help: NovaStar VX4S: control connection, monitoring and input backup
Equipment help: NovaStar VX400s: LED mapping, scaling, PIP and signal loss
Equipment help: NovaStar VX400s: LED mapping, scaling, PIP and signal loss
Equipment help: NovaStar VX600: canvas, scaling, and LED screen
Equipment help: NovaStar VX600: canvas, scaling, and LED screen
3-Step 098K053 and 4-Step 098K054 variants, dimensions and model-specific accessories.
Equipment help: Wenger Signature: plan choral risers for a performance
Supplementary guide for flat deck arrays. Read with manual 280A099 and the actual configuration.
Equipment help: Wenger StageTek: stages for panels, musicians and show changes
Outdoor decks, accessories and documented load conditions. Compare configurations and their deflection criteria before using a rating.
Equipment help: Wenger StageTek Outdoor: legs, connections and weather checks
Sizes, finishes and test configurations for indoor StageTek; uniform loads are not point loads.
Equipment help: Wenger StageTek: stages for panels, musicians and show changes
Event/Tent accessories, connection plates, guardrails, supports and carts. Confirm the part and its purpose before combining components.
Equipment help: Wenger STRATA Event Staging: floor type, beams and deck locks
Manual for the staging and tent floor system cited in the guide. Separates laydown and leveled floors; its components and layouts do not transfer to StageTek or ST8100 or establish site ground capacity.
Equipment help: Stage on grass: ground, supports and level · Wenger STRATA Event Staging: floor type, beams and deck locks
4- and 6-ft variants with 18-in steps and identified accessories. The sheet distinguishes optional rails and fourth-step additions.
Equipment help: Wenger Tourmaster: choir risers for events at several venues
Model-specific Tourmaster carts and part references. Check the riser width, cart and accessories being transported.
Equipment help: Wenger Tourmaster: choir risers for events at several venues
Spanish edition J, earlier than the English edition N available here. Check model, mode and version: features differ between variants.
English manual for the 400 series. Covers DLT, DLR, AIM and ACM variants: use the sections for the identified model and mode.
Equipment help: Williams AV Digi-Wave DLT 400
Manufacturer’s commercial overview of the series and its accessories. Does not replace the manual or confirm which components a proposal includes.
Equipment help: Williams AV Digi-Wave DLT 400
DLT400 transceiver sheet already cited by this guide. Retains revision D; check the data against the unit and its version.
Equipment help: Williams AV Digi-Wave DLT 400
IR T2 infrared transmitter: audio inputs, carrier selection, power and troubleshooting. Coverage depends on the receiver and venue.
Equipment help: Williams AV IR T2: language and infrared listening
Manufacturer’s commercial and technical overview. Published coverage figures require checking the receiver, layout and actual conditions.
Equipment help: Williams AV IR T2: language and infrared listening
G5 generation manual. For Micro F-1, use the Micro section and its restrictions; BlackBox, WhiteBox and ProBox features do not transfer automatically.
Equipment help: Micro F‑1 G5: point link and staged diagnosis
Software 2.0 reference. Page 9 separates MK3-and-later hardware from MK1/MK2; features depend on the unit’s version and options.
Equipment help: ADJ WMX1 Mk3
Overview of the two-length RGBW family. Use the Bar20 rows; Bar10 specifications and accessories do not automatically apply.
Equipment help: GLP impression X4 Bar 20
Shared guide covering both lengths and Normal Mode. Do not transfer Bar10 cell or channel counts to Bar20.
Equipment help: GLP impression X4 Bar 20
Modes and channel functions. The index and manual give different Compressed channel counts; retain this guide’s qualification and check the installed revision.
Equipment help: GLP impression X4 Bar 20
From software v0.60; excludes TH and CwWw. Covers installation, movement and control; match the unit’s personality before applying the DMX map.
Equipment help: GLP impression X4 Bar 20
Describes GLP’s component change and documented mixing differences. Check revision and service history; this is not an instruction to open or modify the fixture.
Equipment help: GLP impression X4 Bar 20
Maxx model overview for selection and project planning. Does not replace manual conditions or confirm included accessories.
Equipment help: GLP impression X5 IP Maxx
For firmware 1.4.4. Compare channel order, footprint and personality with the console profile and fixture; equivalence with the 2.0.1 manual is not assumed.
Equipment help: GLP impression X5 IP Maxx
Covers firmware 2.0.1. Review Main/Sub, mixing and signal-loss behavior against the actual mode; the linked DMX index covers another version.
Equipment help: GLP impression X5 IP Maxx
Edition identified for firmware 1.5. Review mounting, connections, environment and retention before setup; no physical testing is claimed here.
Equipment help: GLP impression X5 IP Maxx
Documents a series LED change and model-specific serial prefixes, including IP Maxx. Does not establish that any particular fixture has received the change.
Equipment help: GLP impression X5 IP Maxx
January 2013 overview of CL5, CL3 and CL1. Helps identify the family and model differences; check software features in the version-specific manual.
Equipment help: Yamaha CL5
CL-series safety, controls and connections. This is the V4.0 edition; use the corresponding reference for V5.8 operation.
Equipment help: Yamaha CL5
V5.8 operating reference: patching, controls, scenes and files. Covers three models; this help page is for CL5.
Equipment help: Yamaha CL5
Manufacturer overview for live sound, streaming, recording and installed applications. Distinguishes Dante-equipped DM3 from DM3 Standard.
Equipment help: Yamaha DM3 with Dante
Family overview and comparison of DM7 and DM7 Compact. Console, expansion controller and optional packages are different components.
Equipment help: Yamaha DM7 Compact: programs, scenes and Dante · Yamaha DM7
E0 edition covering operation, routing, scenes and files. Check DM7 Compact model differences and the installed version before using a feature.
Equipment help: Yamaha DM7 Compact: programs, scenes and Dante · Yamaha DM7
Non-Dante model sheet: specifications, dimensions, options and published curves. Does not cover DXS18XLF-D.
Equipment help: Yamaha DXS18XLF
Covers powered DZR/DXS XLF and passive CZR/CXS XLF speakers. Select the identified equipment’s section before comparing components or features.
Equipment help: Yamaha DXS18XLF · Yamaha DZR10 · Yamaha DZR12 · Yamaha DZR15
Family controls, connections, safety and setup. Distinguishes analog models from -D versions with Dante.
Equipment help: Yamaha DXS18XLF · Yamaha DZR10 · Yamaha DZR12 · Yamaha DZR15
Non-Dante DZR10 sheet: specifications, connections, dimensions and options. DZR10-D variants have their own documentation.
Equipment help: Yamaha DZR10
Model-specific non-Dante DZR12 sheet: specifications, dimensions, options and published curves. Does not cover DZR12-D.
Equipment help: Yamaha DZR12
Model-specific non-Dante DZR15 sheet: specifications, dimensions, options and published curves. Does not cover DZR15-D.
Equipment help: Yamaha DZR15
Overview of PX10, PX8, PX5 and PX3. Compare power ratings and features by model and documented configuration.
Equipment help: Yamaha PX5
Model- and load-specific tables, current draw, dimensions and block diagram. Use the PX5 column and each row’s conditions.
Equipment help: Yamaha PX5
Safety, connections, controls and basic setup. Read with the reference before working on outputs or loads.
Equipment help: Yamaha PX5
PX-series display operation, routing, DSP, files and troubleshooting. Apply the functions and restrictions for PX5.
Equipment help: Yamaha PX5
Overview of QL5 and QL1, including their surface, input and capacity differences. The illustrated racks belong to other families.
Equipment help: Yamaha QL1 · Yamaha QL5
Preserves the A0 edition used by the guide’s references. It should not be confused with the V5.8 reference.
Equipment help: Yamaha QL1 · Yamaha QL5
Safety, controls, connections and basic operation for QL5 and QL1. Edition cited in this guide; capacities depend on the model.
Equipment help: Yamaha QL1 · Yamaha QL5
Operation, routing, processing and configuration for version 5.8. Check the console version before applying its instructions.
Equipment help: Yamaha QL1 · Yamaha QL5
Rio3224-D3-specific sheet: connections, dimensions and conditions for the published measurements. It does not cover Rio3224-D2.
Equipment help: Yamaha Rio3224-D3
Third-generation controls, Dante networking, parameters and startup modes. Use the sections and specifications for Rio3224-D3.
Equipment help: Yamaha Rio3224-D3
Series overview and model differences. Illustrated accessories and systems require their own identification and compatibility checks.
Equipment help: Yamaha TF1
Screens, routing, processing, scenes and maintenance for TF5/TF3/TF1/TF-RACK. Confirm the model’s version and features before applying settings.
Equipment help: Yamaha TF1
TF1-specific connections, specifications, dimensions and optional accessories. Does not cover TF3 or TF5.
Equipment help: Yamaha TF1
Series safety, controls, connections and basic troubleshooting. Read inputs and dimensions in the TF1 column.
Equipment help: Yamaha TF1
D2-specific inputs, outputs, network and measurement conditions. This is not the operating manual or the original Tio1608-D sheet.
Equipment help: Yamaha Tio1608-D2
VXS10S specifications and dimensions; lists UB-DXR8 as an optional accessory. This sheet does not replace the system’s installation manuals.
Equipment help: Yamaha UB-DXR8: orientation, hardware and bracket checks · Yamaha VXS10S: amplification, satellites and troubleshooting
Non-Dante XMV4280 sheet: power and load conditions, dimensions and connections. YDIF and control ports are not Dante ports.
Equipment help: Yamaha XMV4280
Shared manual for four models. For this guide, apply the non-D XMV4280 sections and the actual system conditions.
Equipment help: Yamaha XMV4280
Multi-family catalog; includes VXS10S/VXS10ST and UB-DXR8 in its accessories section. Compare the identified model’s column.
Equipment help: Yamaha UB-DXR8: orientation, hardware and bracket checks · Yamaha VXS10S: amplification, satellites and troubleshooting